498637
38
Zoom out
Zoom in
Previous page
1/42
Next page
35
GFernbedienungH
Symptom Ursache/Lösung Seite
Die Anlage lässt
sich über die
Fernbedienung nicht
bedienen.
•Die Batterien sind leer. Durch neue Batterien ersetzen.
•Verwenden Sie die Fernbedienung in einer Entfernung von 7m
von diesem Gerät und in einem Winkel von 30°.
•Entfernen Sie alle Hindernisse zwischen diesem Gerät und der
Fernbedienung.
•Legen Sie die Batterien richtig und entsprechend der Markierungen
q und w ein.
•Der Fernbedienungssensor des Geräts ist starkem Licht
ausgesetzt (direktes Sonnenlicht, Neonlicht usw.). Bewegen Sie
das Gerät an einen Ort, an dem es keiner direkten Beleuchtung
ausgesetzt ist.
3
3
3
3
3
Rückstellung des Mikroprozessors
Bei der Rückstellung des Mikroprozessors werden alle Einstellungen auf die Standardwerte gesetzt.
1
Drücken Sie + und gleichzeitig.
Schaltet den Menüeinstellungsmodus ein, und das Menü
erscheint auf dem Display (vSeite22 “Menüplan”).
2
Drücken Sie + oder , um “Werkseinstellung”
auszuwählen, und drücken Sie dann 13.
3
Drücken Sie + oder , um “Zurücksetzen? Ja”
auszuwählen, und dann 13.
“Initialisiere” wird angezeigt, und die Standardeinstellungen
werden wiederhergestellt.
Wenn in Schritt 3 “Initialisiere” nicht angezeigt wird, fangen Sie wieder bei Schritt 1an.
Zurücksetzen
Durch einen “Zurücksetzen” wird das Gerät neu gestartet.
Führen Sie dieses Verfahren durch, wenn das Display nicht normal angezeigt wird oder Bedienungen nicht
durchgeführt werden können.
Führen Sie, während das Gerät eingeschaltet ist,
einen dünnen, spitzen Gegenstand (
z
2) in die Reset-
Öffnung (
z
1) ein, und drücken Sie die Reset-Taste
des Geräts.
Das Gerät wird automatisch neu gestartet.
•Bereiten Sie einen dünnen, spitzen Gegenstand (z.B. einen
Zahnstocher oder eine gerade gebogene Büroklammer) für das
Drücken der Reset-Taste am Gerät vor.
z 1 Dicke (Durchm.): 0,5 mm – 1,5 mm
z 2 Länge: 30 mm oder länger
AC IN
USB NETWORK
WIRELESS LAN LOUDNESS
ON
/
STANDBY
AUX IN
NETLINK WPS
5V 0.5A
z
1
Vorbereitungen
Bedienungsmöglichkeiten
InformationenInformationen
38


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dsd-500-cocoon-home

Reset search

  • I bought a brand new Denon Cocoon DSD500. When turning on at home the display did not work and I hadn’t been able to update te firmware and do nothing practically. The only thing that woks is the iPod classic. Could you please help me by telling me what to do to make the display works again or this is something that competes a professional on this matters? I have tried many things to make it work but that is a problem with technology; it becomes so outdated too fast. I haven’t been able to make it work. The display is important to reset it and make it work from zero but since it is not possible to hard reset it, I think I have to return it. There’s a soft reset but it doesn’t work and it doesn’t make the unit work. Could you please help me? Hope you can do. Thank in advanced. Sincerely, Mario from Colombia Submitted on 15-6-2024 at 07:29

    Reply Report abuse
  • Hello. I found this amazing speaker unpacking in a store but when I took it home and I turned it on the display did not work; it is always off and since then I have no been able to do anything with the speaker. Is it any way to turning the device display on or is it a repair beyond my limits and it needs technical service e from someone professional? Hope you can help. Thanks in advance! By the way, the reset button on the rear back panel does do nothing. I have reset it a couple of time but nothing happens. Submitted on 15-6-2024 at 07:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DSD-500 Cocoon Home at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DSD-500 Cocoon Home in the language / languages: German as an attachment in your email.

The manual is 8,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DSD-500 Cocoon Home

Denon DSD-500 Cocoon Home User Manual - English - 42 pages

Denon DSD-500 Cocoon Home User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info