584601
9
Zoom out
Zoom in
Previous page
1/14
Next page
6
Getting Started
Part names
and functions
Connections
Preparations
Operations Troubleshooting Specifications
ENGLISH
Connections
Adjusting the stylus pressure and anti-skating
Adjust the stylus pressure for the cartridge to be used. Anti-skating
adjustment is for negating the affect of centrifugal force on the stylus
tip caused by rotation of a record during playing.
1
Set the ANTI-SKATING knob to “0”.
2
Lower the lifter lever and move the tone arm over
the turntable.
For a cartridge with a removable stylus cover, remove the stylus
cover.
3
Turn the counterweight so that the tone arm will be
parallel to the turntable when the head shell is gently
released from holding status.
To protect the stylus tip, turn the counterweight slowly and
move it in the direction of the arrow.
Parallel
Counterweight
If the cartridge to be used is too light or too heavy, the tone arm will
not be level. For such a cartridge, use an optional counterweight
(sold separately) made by our company. For details, consult your
nearest repair outlet.
4
Return the tone arm to the armrest.
5
Holding the counterweight with a nger so that it
does not move, turn the stylus pressure adjustment
ring so that it’s “0” mark is lined up with the black
line of the tone arm's rear shaft.
Turn the stylus pressure
adjustment ring only.
6
Turn the counterweight in the direction of arrow
and set to the appropriate stylus pressure for the
cartridge.
The appropriate stylus pressure for the included cartridge is 2.5 g.
Set to “2.5”.
For the appropriate stylus pressure for the cartridge to be used,
refer to the operation manual for the cartridge.
7
Turn the ANTI-SKATING knob and set to the same
value as for the cartridge’s stylus pressure.
For the cartridge of the stylus pressure of 3.0 g or more, set
to “3”.
The proper anti-skating value can be achieved.
A
N
T
I
-
S
K
A
T
I
N
G
0
1
2
3
Setting reference point
NOTE
Take care not to damage the stylus tip with the turntable sheet.
Connections
NOTE
Do not plug in the power cord until all connections have been
completed.
When making connections, also refer to the operating instructions of
the other components being connected.
Be sure to connect the left and right channels properly (left with left,
right with right).
Do not bundle power cords together with connection cables. Doing
so can result in noise.
R L GND
PHONO OUT
AC IN
AC IN
R
SIGNAL
GND
L
PHONO IN
R
L
R
L
Amplifier
Audio cable
Power supply outlet
(AC 120 V, 60 Hz)
Preparations
Adjustments
1.DP-A100E3_ENG_004_0825.indd 6 2010/08/26 8:59:09
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DP-A100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DP-A100 in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DP-A100

Denon DP-A100 User Manual - German - 16 pages

Denon DP-A100 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info