29163
11
Zoom out
Zoom in
Previous page
1/35
Next page
11
ENGLISH
Each push of the
y
PLAY/PAUSE (13) button
switches between playback and pause.
y
PLAY/PAUSE (13) button illuminates solid green
during playback and flashed in pause.
When the
y
PLAY/PAUSE (13) button is pushed
during play, the DN-S1000 pauses playback at that
point. Push
y
PLAY/PAUSE (
13) button once
again and playback resumes.
Playback will pause when SCRATCH is selected
with the
!8
DISC MODE button and the scratch disc
is held with your hand. Playback resumes when
your hand is released.
5
BASIC OPERATION
Play and pause
1
2
Push the
@9
PITCH/KEY
button to PITCH LED lights up.
PITCH KEY (key adjust) OFF
0
Move the
@8
Pitch slider to adjust
the pitch. The current pitch setting
is displayed on the display.
Pitch decreases
Pitch increases
PITCH/KEY
RANGE
When the i CUE button is pushed during playback,
the track stops and returns to the original position of
which playback started from, the (Cue point). This
function is also called Back-Cue. With the Back-Cue
function, you can start from exactly same position.
The i CUE button illuminates solid red when DN-
S1000 is ready to start playback.
You can set and change Cue point as follows.
• When you started playback.
• Track select finished.
• manual search.
Play and Cue
If you would like to start playback other from the
beginning of the track, you need to move Cue Point
using fast Search and manual search function.
With Pitch slider you can adjust the playback speed
(Pitch).
If you would not prefer to change key of sound, use
the Key Adjust function.
Adjusting the pitch
3
DN-S1000 has five pitch ranges,
4%, 10%, 16%, 24% and 100%.
When the
@9
RANGE button
is pushed for more than 1 sec,
the pitch range can be selected
with the
@3
PARAMETERS
knob.
4
After you found your
preferred Cue point, push
the
i
CUE button then a
new Cue point is set.
2
Push the
!8
DISC MODE
button to set
o
Scratch
Disc to search mode. The
!8
DISC MODE button
LEDs will turn off.
3
Turn the
o
Scratch Disc to
change Cue point. You can hear
the short sound of the current
Cue point.
When
o
Scratch Disc is turned in the pause,
Cue or frame repeat mode, it works as the
manual search function.
CUE/STUTTER
CUE
With PITCH BEND function you can change pitch
temporary. DN-S1000 has two ways for this
function PITCH BEND buttons and Scratch Disc.
Pitch Bend
1
[PITCH BEND +/ buttons]
Push the
@6
PITCH BEND
– or
@7
+ button for
momentary change of
pitch.
While holding these buttons down, the pitch
continues to change up to the limitation.
After releasing the PITCH BEND buttons,
playback pitch returns to slider setting.
[Scratch Disc]
• When the disc mode is set to
SEARCH/BEND with the
!8
DISC
MODE button, the playback speed
can be changed by turning
o
Scratch Disc during playback.
PITCH BEND
2
:
O
F
F
ON
:
DI
SC
M
O
D
E
S
EAR
C
H
/
BEND
SC
RAT
CH
Turn the
@3
TRACK knob.
By pushing
@3
TRACK knob down while turning, the
tracks will increment 10 at a time.
Select the track
!
Move the Cue point
1
You can move to the approximate playback
start position by
@4
or
@5
FAST SEARCH
buttons.
[QUICK JUMP]
If the FAST SEARCH button
is tapped shortly, the
playback position jumps about 10 seconds.
The jump time can be selected in the
preset mode from 10,20,30 or 60 sec.
[FAST SEARCH]
When the FAST SEARCH button is pressed
and held in, the disc is fast-searched.
Power on play
When “POWER ON PLAY” is set to “ON” at “⁄4
PRESET (10)”, playback starts from the first track
on the disc when the power is turned on.
Q
UICK JUM
P
FA
S
T
S
EAR
CH
PITCH/KEY
RANGE
3
When the
@3
PARAMETERS
knob is pushed the pitch
range is entered and the
pitch range selection mode
is cancelled.
MP3 SEARCH MODE
PARAMETERS
PUSH
TRACK SEARCH
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DNS1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DNS1000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info