498643
17
Zoom out
Zoom in
Previous page
1/51
Next page
14
Setting the network [Network]
Connecting wired LAN
Use this procedure to configure the wired LAN settings.
n Network connecting
(when “DHCP”settings are “On”)
When using this unit with the broadband router’s DHCP function
enabled, this unit automatically performs the IP address setting
and other settings.
1
Connect the ETHERNET cable
(vpage 8 “Connecting to a
home network (LAN)” – “Wired
LAN”).
2
Press POWER X to turn on
power to the main unit.
3
Press SETUP.
Turns on the Menu settings mode
and the Menu appears on the display
(vpage10 “Menu map”).
4
Use ui and ENTER to select
“Network” – “Settings” –
“DHCP (On)”, then press ENTER
or p.
“Select DHCP” menu appears.
5
Use ui to select “On”, then press ENTER or p.
“DHCP (On)” menu appears.
6
Use ui to select “Test Connection”, then press
ENTER or p.
“Wait for the network to connect...” is displayed, and the unit
starts connecting to the LAN.
•When the connection is made successfully, “Connected!” appears.
•If the connection cannot be established, “Connection Failed” is
displayed. Perform steps 1 – 6 again.
You may need to set the network connection manually, depending
on the provider you use. To set the connection manually, use the
setting procedure of “Network connecting (when “DHCP” settings
are “Off”)”.
n Network connecting
(when “DHCP” settings are “Off”)
This section explains the settings when connecting this unit to a
network that does not have a DHCP function.
To configure the settings manually, check the setting details with
your network administrator.
1
Perform steps 1 4 of the
“Network connecting (when
“DHCP”settings are “On”)”
procedure and select “Off” in
step 5.
“DHCP (Off)” menu appears.
2
Use ui to select “IP Address”,
then press ENTER or p.
“Enter IP Address” menu appears.
3
Use ui p or 0 – 9 to input the
IP address and press ENTER.
4
Use ui p or 0 – 9 to input the address for
“Subnet Mask”, “Gateway”, “Primary DNS”, and
“Secondary DNS”.
5
Use ui to select “Test Connection”, then press
ENTER or p.
“Wait for the network to connect...” is displayed, and the unit
starts connecting to the LAN.
•When the connection is made successfully, “Connected!” appears.
•If the connection cannot be established, “Connection Failed” is
displayed. Perform steps 1 – 4 again.
Preparations
Operations
Informations
Preparations
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DNP-F109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DNP-F109 in the language / languages: English as an attachment in your email.

The manual is 9,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DNP-F109

Denon DNP-F109 User Manual - German - 51 pages

Denon DNP-F109 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info