498792
34
Zoom out
Zoom in
Previous page
1/52
Next page
28
ENGliSh
Add New Feature
•In order to add new functions, the environment and settings required
for connecting to broadband internet are needed (vpage6).
•Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit’s power on.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Other” – “Add New Feature”,
then press [ENTER], <1/3
ENTER
> or p.
Start Upgrade
Execute the upgrade process.
•If the upgrade is not successful, an error message identical to those
in “Firmware Update”(vpage 28) will appear on the display.
Check the settings and network environment, then update again.
Upgrade Status
Display a list of the additional functions provided
by the upgrade.
Upgrade ID
The ID number shown on this screen is needed
when carrying out the procedure.
See the DENON website for details about updates.
When the procedure is complete, “Registered” is displayed and
updates can be carried out. If the procedure has not been carried
out, “Not Registered” is displayed.
[Notes concerning use of “Firmware Update” and
“Add New Feature”]
•Do not turn off the power until updating or upgrating is completed.
•Even with a broadband connection to the Internet, approximately
20 minutes is required for the updating/upgrading procedure to be
completed.
•Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed.
•Furthermore, updating/upgrading the fi rmware may reset the backup
data for the parameters, etc. set for this unit.
•If the update or upgrade fails, remove and re-insert the power cord.
“UPDATE RETRY” appears on the display and update restarts from
the point at which update failed. If the error continues despite this,
check the network environment.
Setting the others [Other]
Firmware Update
•In order to update the fi rmware, the environment and settings
required for connecting to broadband internet are needed
(vpage6).
•Perform the fi rmware update operation after at least 2 minutes has
elapsed since turning this unit’s power ON.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display (vpage20 “Menu map”).
2
Use ui to select “Other” – “Firmware Update”,
then press [ENTER], <1/3
ENTER
> or p.
Check for Update
Check for fi rmware updates. You can also check
approximately how long it will take to complete
an update.
Start
Execute the update process.
•If updating fails, the set automatically retries, but if updating is still
not possible, one of the messages shown below is displayed. If
the display reads as shown below, check the settings and network
environment, then update again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the fi rmware has failed.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
[ENTER]
[DISPLAY]
[SEARCH]
[TUNER]
[MENU]
ui p
ui
p
<1/3 ENTER>
1.DNP720AEE2_ENG_Final_0727.indd 28 2011/07/30 8:39:21
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DNP-720AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DNP-720AE in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DNP-720AE

Denon DNP-720AE User Manual - German - 52 pages

Denon DNP-720AE User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info