614632
5
Zoom out
Zoom in
Previous page
1/17
Next page
5
ENGLISH
1
MAIN FEATURES
01. Penny & Giles Crossfader
Smooth and reliable mixing is excelled by Penny &
Giles Crossfader.
02. VCA controlled Channel Fader and Crossfader
03. Channel Fader and Crossfader curve adjustable
This feature allows adjusting the “shape” of the
Crossfader and Channel fader response from a
gentle curve for smooth to the steep pitch
required for top performance cut and scratch
effects.
04. Channel Fader and Crossfader Reverse
05. Channel Fader and Crossfader Start
The CD player can be started or stopped simply by
increasing or decreasing the level of the Ch. fader
or by using the Crossfader left to right or right to
left. (This function can only be used when the
DENON CD players DN-S3000, DN-S5000, DN-
S1000 or etc. is connected to the DN-X300.)
06. Channel Reverse function
This function allows the left hand channel fader or
right hand channel fader to control PGM1 or
PGM2.
07. Enhanced Input/Output terminals
4 LINE, 2 PHONO, 1 AUX, 1 Microphone systems,
2 MASTER outputs and 1 BOOTH output are
provided independently. Effect SEND/RETURN
terminals are also provided for a external effects
processor.
08. 3-Band equalizer/gain
LOW, MID, HI and GAIN controls are available on
every input channel.
09. 3-Band Equalizer Kill function
10. 8 direction placement for input selector
11. Microphone Talkover function
2
PART NAMES AND FUNCTIONS
(Refer to page 3.)
(1) Top panel
q MIC ON/OFF/TALKOVER switch
When TALKOVER is selected , all signals except
the microphone level are decreased by 20 dB.
When at the ON or OFF position all signals
remain at their standard levels.
w MIC EQ controls
Contour the frequency response of the MIC
input –12 dB to +12 dB.
• At the center position, sound is flat.
e MIC LEVEL control
• Adjusts the level of Mic signal.
r AUX INPUT control
• Adjusts the level of AUX input.
This input is mixed after the Crossfader and
EFFECT LOOP.
t Source EQ controls
Contour the frequency response of the selected
inputs.
HI and MID:
Adjusts the high-tone and mid-tone sound –40
dB to +10 dB.
LOW:
• Adjusts the low-tone sound –40 dB to +6 dB.
NOTE:
Clipping may occur if adjustments are set to
harsh.
y GAIN control
• Adjusts the gain of each input channel.
u EFFECT LOOP WET/DRY control
Use this to adjust the ratio of original and
effected sound.
i EQ ON/OFF button
• When the LED is lit, EQ is ON. Otherwise EQ is
bypassed.
o PGM BALANCE control
• Adjusts the L/R balance of the PGM input.
!0 EFFECT LOOP ON/OFF switch
• Routes the assigned signal through the external
processor attached to the SEND/RETURN
connectors on the rear.
When the EFFECT LOOP is ON, the LED is lit.
(When the external processor isn’t connected,
the LED will blink.)
!1 CH REVERSE button
This switch allows the left hand fader or right
hand fader to control PGM1 or PGM2.
When the CH REVERSE mode is ON, the CH1
fader will be able to control PGM 2 sound and
the CH2 fader will be able to control PGM 1
sound.
NOTE:
Please don’t confuse with the CH 1/2 FADER
REVERSE switch $4.
!2 MASTER LEVEL control
• Adjust the level of the MASTER outputs.
!3 BOOTH OUTPUT control
• Adjusts the level of BOOTH output.
!4 CUE SELECT switch
• This switch is used to select the signal for CUE.
Selected CUE sound will send to the
headphone.
!5 Headphone PAN control
This function allows you to monitor the CUE
level as well as the MASTER output in your
headphones. A CUE Level may only be
monitored of the CUE signal is selected.
Serves two purposes…In the STEREO mode it
changes the relative levels of the CUE and
MASTER mixed together in both ear cups. In
the SPLIT CUE mode it changes the balance
between the monaural CUE sound in the left
and monaural MASTER sound in the right.
!6 PHONES LEVEL control
• Adjusts the headphone output level.
– TABLE OF CONTENTS –
z
MAIN FEATURES ...............................................5
x
PART NAMES AND FUNCTIONS...................5, 6
c
CONNECTIONS..................................................7
v
SPECIFICATIONS................................................8
b
FADER START ....................................................9
n
ROTATING INPUT SELECT SWITCHES ...........10
2 ACCESSORIES
Please check to make sure the following items
are included with the main unit in the carton:
q Operating instructions.......................................1
w AC adaptor ........................................................1
(AA-26 : for AC 120 V, AA-27 : for AC 230 V)
2 INTRODUCTION
Thank you very much for purchasing the DENON DN-X300 DJ MIXER.
DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s
non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are
certain to provide you with many hours of outstanding listening pleasure.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info