614628
17
Zoom out
Zoom in
Previous page
1/26
Next page
13
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Setting the USB audio input
One of the two modes below is set using the USB
ASSIGN CH/MASTER
button for the USB audio input
assignment destinations.
The LED on the side corresponding to the mode
selected lights.
The USB audio input levels can be adjusted using
Utility settings. The adjustment values are stored on a
mode by mode basis.
q CH INPUT mode
Select this mode when mixing sound using only the DN-X1700
without using the mixer functions of the DJ software.
The USB audio input signals are assigned using the confi guration
shown below.
USB channel 1 and 2 inputs
Input channel 1
USB channel 3 and 4 inputs
Input channel 2
USB channel 5 and 6 inputs Input channel 3
USB channel 7 and 8 inputs Input channel 4
w MASTER mode
Select this mode when using both the mixer functions of the DJ
software and the DN-X1700’s functions.
The USB audio input signals are assigned to the buses shown
below.
USB channel 1 and 2 inputs Master bus
USB channel 3 and 4 inputs Cue monitor bus
USB channel 5 and 6 inputs
Disabled
USB channel 7 and 8 inputs
Disabled
The mixer output of the DJ software is mixed in the buses using
the DN-X1700.
* Ensure that the audio output settings of the DJ software correspond
to the specifi cations given above.
USB audio
This unit features a 24-bit 96 kHz USB audio input/output sound card
function which supports up to 8 channels (4 stereo systems). The
sampling frequency can be set to 44.1 kHz, 48 kHz or 96 kHz using a
Utility setting (factory setting: 96 kHz).
* When the unit is connected to a computer which runs Windows XP,
Vista or a similar operating system, install DENON DJ ASIO driver
Ver2 contained on the CD-ROM provided. If the Ver1 driver is already
installed, fi rst uninstall it, and then install the Ver2 driver.
* Depending on the computer used, select the PC/MAC section
settings under System Setting among the Utility settings.
Selecting the USB mode
The respective functions given below are carried out in the operation
modes of the USB A terminal (USB host mode) and USB B terminal
(USB device mode).
USB A :
Preset data import/export function
Version upgrading
USB B :
USB audio interface function
USB MIDI interface function
The operation mode to be established when the unit's
power is turned on can be selected by a Utility setting.
(Factory setting: USB A)
To switch from USB A (host mode) to USB B (device mode):
1
Press the UTILITY/–USB A/USB B button for one
second.
2
Operation now transfers to the screen shown below.
3
Select OK/Cancel using the EFX SELECT control
(EFX2), and press the button to enter the selection.
4
The indicator changes from USB-A to USB-B, and the
device mode is established.
(* When a speci c period of time elapses with no
computer connected to the USB B terminal, the
indicator changes back to USB-A, and the host mode
is automatically selected.)
5
To select the host mode again, press the UTILITY/–USB
A/USB B button for one second, and select the settings
by following the same steps.
USB Settings
Setting the USB audio output
Any sound source of the 4 systems provided—1 to 4 input channels
(Pre EQ), mic input (Post Send VR), master output (Pre Limiter) or
REC output—can be selected as the USB audio output.
The USB audio output level can be adjusted using a Utility setting.
1
Press the UTILITY/–USB A/USB B button. The Utility
setting screen is displayed.
2
Using the EFX SELECT control (EFX2), select Audio
Setting USB Audio Setting Output Source
Select. One of the audio sources assigned to the USB
output channels is selected on the selection screen
displayed.
3
Press the UTILITY/–USB A/USB B button. The Utility
setting screen is closed.
USB
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1700 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X1700

Denon DN-X1700 User Manual - German - 26 pages

Denon DN-X1700 User Manual - Dutch - 26 pages

Denon DN-X1700 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info