614617
27
Zoom out
Zoom in
Previous page
1/32
Next page
23
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Utility
ENGLISH
Category Item Parameter Value Default Settings Setting Details
1 Audio Setting
1 Master Setting 1 MONO ON / OFF OFF When set to ON, the Master output is monaural.
2 Mic Setting
1 Ducking Level -20dB to -40dB -30dB Adjusts the amount of attenuation for the audio level when ducking is operating.
2 Ducking Response Fast or Normal Normal Adjusts the ducking response.
3 Mic EQ
1 Hi 1kHz to 4kHz 2kHz
Sets the Mic EQ cut off frequency.
2 Low 500Hz to 2kHz 1kHz
3 Default -
4 Mic to Booth/Rec ON / OFF OFF When set to ON, the Mic sound is output from Booth and Rec.
3 Isolator EQ
1 X.Over Hi 1kHz to 8kHz 2kHz
Sets the boundary lines for the frequencies that control Hi, Mid, and Low in the channel
equalizer.
2 X.Over Low 100Hz to 800Hz 360Hz
3 Default -
4 Cue Setting 1 Cue Mode *1 Mix / Solo Mix When set to Solo, audio from only one channel can be continually cued.
5 Head Phones EQ
1 EQ Hi -15dB to +15dB 0dB
Adjusts the equalizer settings for the headphones. 2 EQ Low -15dB to +15dB 0dB
3 Default -
6 EFX Send/Rtn 1 Unity Level Select -10dBV / 0dBV -10dBV Selects the signal level for the Effect Rtn with connected device.
7 USB Audio Setting
1 USB Assign Ch / Master Ch Selects whether to assign a channel to the USB audio input, or to add a Master/Cue bus.
2 OutputSourceSelect
1 USB1 / USB2
Non,CH1,CH2,CH3,CH4,Master,Re
c,Mic
Master
Selects the source output with the USB audio.
2 USB3 / USB4 Mic
3 USB5 / USB6 CH2
4 USB7 / USB8 CH3
3 Preset Input Select
1 CH1
USB1/USB2,USB3/USB4,
USB5/USB6,USB7/USB8,DVS
DVS Selects the source input with P1–P4.
2 CH2
3 CH3
4 CH4
4 Output Level VR -20dB to +20dB 0dB Selects the USB audio output level.
5 CH Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Channel 1–4.
6 Mas Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Master.
7 Cue Input Level VR -20dB to +20dB -6dB Selects the level when USB audio is input into Cue.
8 Digital Out Setting 1 Digital Output VR -20dB to +20dB 0dB Selects the output level for the Digital Out terminal.
9 X-Fader Setting
1 A Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the A side cross fader.
2 B Side Cut Position *2 -2.0mm to +8.0mm 0.0mm Adjusts the rise position for the B side cross fader.
10 Beat Breaker Setting 1 to 5 1 Edits the custom pattern for the BeatBreaker.
2 System Setting
1 Sampling Frequency 44.1kHz / 48kHz / 96kHz 96kHz Selects the internal sampling rate for the unit.
2 PC/MAC*3 PC Mode / MAC Mode PC Mode Selects the type of connected computer when in device mode.
3 Version XXXX - Displays the version number.
3 MIDI Setting
1 MIDI INPUT CH 1 to 16, OMNI 1 Selects the USB MIDI INPUT CH.
2 MIDI OUTPUT CH 1 to 16 1 Selects the MIDI OUTPUT CH.
3 MIDI Output Enable
1 5Pin ON / OFF ON
Selects whether or not to output from MIDI.
2 USB ON / OFF ON
4 MIDI CLK
1 5Pin ON / OFF ON
Selects whether or not to output from MIDI CLOCK.
2 USB ON / OFF ON
5 MIDI Page 1 to 4 1 Selects the MIDI page for when the power is switched on.
6 V-LINK
1 Model V-4 / V-8 V-4 Selects the model connected to V-LINK.
2 Device ID 0x00 to 0x1F 0x10 Selects the Device ID for the device connected to V-LINK.
3 Trigger Level -40dBFS to 0dBFS -30dBFS Selects the level of trigger that switches the image effects when Ping Pong Delay is used.
4 Cross Fader Contour ON/OFF OFF Selects whether to refl ect the crossfader curve on V-LINK.
5 Cross Fader
Enable / Disable Enable Selects whether or not to use each control with V-LINK.
6 Beat
7 Parameter
8 DRY/WET
9 EFX Button
10 FUNC1/FUNC2
4 Other Setting
1 Preset Export Exit / Execute*4 Exit Writes the Presets to the USB memory.
2 DN-X1600 Initialize Exit / Execute*5 Exit Returns settings to the factory settings. (Excluding the Owner Setting items)
5 Owner Setting Display only Displays the details of the Owner Settings.
*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.
*2 The cut-off position of the Crossfader can be adjusted separately for each side.
*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.
When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.
*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.
*5 The settings for these Preset are set to the factory settings.
Preset Items and Data
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1600 in the language / languages: English as an attachment in your email.

The manual is 7,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X1600

Denon DN-X1600 User Manual - German - 32 pages

Denon DN-X1600 User Manual - Dutch - 32 pages

Denon DN-X1600 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info