614645
28
Zoom out
Zoom in
Previous page
1/49
Next page
A
B
B
26
ENGLISH
GENERAL
Type: Compact disc player
Disc type: Standard compact discs (12 cm discs), CD-TEXT
CD-R, CD-RW discs
NOTE: Finalized CD-R or CD-RW discs can be played back in this unit.
However, according to recording quality, some CD-R/RW discs
cannot be played.
Dimensions: Player unit: 285 (W) x 111.5 (H) x 327 (D) mm (without feet)
11-7/32 (W) x 4-25/64 (H) x 12-7/8 (D)
Installation: Table top type
Mass: Player unit: 5.7 kg (12 lbs 9 oz)
Power supply: U.S.A., Canada and Taiwan R.O.C. models: 120 V AC ±10%, 60 Hz
European models: 230 V AC ±10%, 50 Hz
Power consumption: 18 W
Environmental conditions: Operational temperature: 5 to 35°C (41 to 95°F)
Operational humidity: 25 to 85% (no condensation)
Storage temperature: 20 to 60°C (4 to 140°F)
AUDIO SECTION
Main out, Monitor out
Quantization: 24-bit linear per channel
Sampling frequency: 44.1 kHz at normal pitch
Oversampling rate: 8 times
Total harmonic distortion: 0.01% or less
Signal to noise ratio: 90 dB or more
Channel separation: 85 dB or more
Frequency response: 20 to 20,000 Hz
Analog output
Output level: 2.0 V r.m.s.
Load impedance: 10 k/kohms or more
Digital output
Signal format: SPDIF
Output level: 0.5 Vp-p 75 /ohms
FUNCTIONS
Instant start: Within 20 msec.
Variable pitch: ±4% (0.05% pitch), ±10% (0.1% pitch), ±16% (0.1% pitch)
±24% (0.1% pitch), ±100% (1.0% pitch)
Pitch bend: Pitch range ±32%
Pitch range ±100%: ±99%
Sampler
Sampling: 44.1 kHz
Length: 15 sec.
Output level: 2.0 V r.m.s. (Variable / -14 ~ +6 dB)
Variable pitch: ±24% (0.1% pitch)
Search precision: 1/75 sec. (1 subcode frame)
Max. scan speed: Over 20 times normal speed
Max. MEMO memory steps: 5000 steps
Specifications and design are subject to change without notice for purpose of improvement.
16
SPECIFICATIONS
1. Remove a screw (Hexagon socket head) and
pull out Scratch Disc and Slip Mat.
2. Remove Belt from Motor Pully.
3. Remove 3 screws (< head) and pull out
Platter.
4. Remove Belt from Platter.
5. Mount in the order 4 1.
B
A
Platter
Stabilizer
(Hexagon socket head)
Scratch Disc
Slip Mat
Belt
Motor Pully
(< head)
CAUTIONS:
Unplug the power cord before replacing the
belt.
Do not touch the sensor or scale() when
removing the Platter.
Do not apply oil or grease to the belt when
replacing it.
Belt
Platter
(< head)
17
REPLACING THE BELT
On the DN-S5000, the platter is driven by a belt.
In the unlikely case of trouble, use the procedure described below to replace the belt.
Slip Sheet
28


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dn-s5000

Reset search

  • Awe. Guys anyone know how to update firmware of DNS -5000 ? Submitted on 30-8-2023 at 07:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info