614645
13
Zoom out
Zoom in
Previous page
1/49
Next page
11
ENGLISH
Each push of the o PLAY/PAUSE (13) button
switches between playback and pause.
PLAY/PAUSE (
13) button illuminates solid green
during playback and flashed in pause.
When the o PLAY/PAUSE (
13) button is pushed
during play, the DN-S5000 pauses playback at that
point. Push PLAY/PAUSE (
13) button once again
and playback resumes.
When the Scratch mode is set to MAIN, the Platter
turns when the Main Track is played. When the
rotation of Scratch Disc is stopped by pressing with
the finger, the pause mode is set, and when the
finger is released playback resumes.
5
BASIC OPERATION
Play and pause
1
2
Push the $2 PITCH/KEY
button to PITCH LED lights up.
PITCH KEY (key adjust) OFF
Move the $1 Pitch slider to adjust
the pitch. The current pitch setting
is displayed on the display.
Pitch decreases
Pitch increases
RANGE
PITCH / KEY
When the !1 CUE button is pushed during playback,
the track stops and returns to the position that
current playback started (Cue point) and prepares
for next playback. This function is called Back-Cue.
With Back-Cue function, you can start from exactly
same position. The CUE button illuminates solid red
when DN-S5000 is ready to start playback.
You can set and change Cue point as follows.
When you started playback.
Track select finished.
manual search.
Play and Cue
If you would not like to start playback from
beginning of the track, you need to move Cue Point
using fast Search and manual search function.
Move the Cue point
1
You can move to the approximate
playback start position by fast-
forwarding and fast-reversing
using the #1 FAST SEARCH knob.
With Pitch slider you can adjust the playback speed
(Pitch).
If you would not change key of sound, use the Key
Adjust function.
Adjusting the pitch
3
DN-S5000 has five pitch ranges,
4%, 10%, 16%, 24% and 100%.
When the $2 RANGE button
is pushed for more than 1 sec,
the pitch range can be selected
with the PARAMETERS knob.
RANGE
PITCH / KEY
4
After you found your
preferred Cue point, push
the !1 CUE button then new
Cue point is set.
2
Turn the !4 SCRATCH source
select knob to select Scratch
Disc to search mode. The all
Scratch mode LEDs will turn
off.
3
Turn the !2 Scratch Disc to
change Cue point. You can hear
the short sound of the current
Cue point.
When Scratch Disc is turned in the pause,
standby or frame repeat mode, works as the
manual search function.
With PITCH BEND function you can change pitch
temporary. DN-S5000 has three ways for this
function PITCH BEND buttons and Scratch Disc.
Pitch Bend
1
3
[PITCH BEND +/ buttons]
Push the #9 PITCH BEND
or $0 + button for
momentary change of
pitch.
While holding these buttons down, the pitch
continues to change up to the limitation.
After releasing the PITCH BEND buttons,
playback pitch returns to slider setting.
[Scratch Disc]
When the Scratch mode is
set to SEARCH, the playback
speed can be changed by
turning !2 Scratch Disc
during playback.
The pitch increases gradually when the
Scratch Disc is turned clockwise and
decreases when turned counterclockwise.
When you stop turning the Scratch Disc, the
playing speed returns to the previous pitch.
PITCH BEND
2
When the Scratch source is
set to MAIN and the Platter is
turning, playback of the Main
source can be slowed
temporarily by lightly pressing
!2 Scratch Disc or PLATTER.
In addition, playback can be quickened
temporarily by pushing Scratch Disc or
PLATTER in the direction in which the Platter
is turning.
FAST SEARCH
SEARCHMAIN
SAMP.
TRACK
Turn the #4 TRACK knob.
By pushing #4 TRACK knob down while turning, the
tracks will change 10 at a time.
Select the track
Normally the BPM for the currently playing track is
measured and displayed on the auto BPM counter.
NOTE:
For some tracks the BPM cannot be measured
properly.
BPM LOCK:
When this button is pressed once while the auto
BPM counter is operating, the data measured by
the auto BPM counter is locked.
TAP:
When you push this button repeatedly, the Auto
mode turns off and starts measuring your Beats Per
Minute (BPM) by tapping.
INPUT BPM:
When the TAP button is pressed and held in for
more than 2 seconds, the BPM input mode is set
and the BPM value can be input directly with the
PARAMETERS knob. When the button is pressed
again, the BPM input mode is turned off.
NOTE:
If you select a new track, AUTO BPM mode turns
on automatically.
BPM
13


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dn-s5000

Reset search

  • Awe. Guys anyone know how to update firmware of DNS -5000 ? Submitted on 30-8-2023 at 07:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info