Manual Denon DN-S3500 (page 8 of 43) (English, Spanish)

614643

Zoom out

Zoom in

1/43

ENGLISH

INSTALLING THE PLATTER, THE SCRATCH DISC AND

THE SLIPMAT / CONNECTIONS

(2) CONNECTIONS

1. Turn off the POWER switch.

2. Connect the RCA pin cords between the DN-S3500 outputs and inputs of your mixer.

3. If your mixer has Fader Start function such as our DENON Mixer, connect FADER jack to the mixer using 3.5

mm stereo mini cord.

POWER ON OFF

DIGITAL OUT

LINE OUTFADER IN OUT

MEMO

LINE1

FADER

PGM 1

FADER

LINE

OUT

(3) INSTALLATION

Please set up DN-S3500 horizontally.

(4) INSTALLING THE 7” (17cm) RECORD ADAPTOR

Your own 7” (17cm) vinyl record can be installed on this product by using the provided adaptor.

This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable

feel.

*Make sure the record used is flat and not warped.

• 7” (17cm) record adaptor accessories

q Adaptor (2) ........................................................1

w Screw (< head) ................................................3

e Fixing Plate .......................................................1

DN-X300

(1) INSTALLING THE PLATTER, THE SCRATCH DISC and THE SLIPMAT

• Accessories

1. Install the Platter on the taper boss of the motor.

2. Install the Slip Mat on the Platter.

3. Insert D hole of the Scratch Disc on the D shaft of

the Motor.

NOTE: The printed face is located on the Slip Mat

side.

4. Insert the Adaptor according to the direction of the

arrow.

NOTE: Please note the direction of insertion.

NOTE:

Depending on the RECORD you choose, friction

with the Slipmat may not be enough, which can

cause an undesired drag sound.

If so, use a different record that’s thicker or

heavier.

1. Set Adaptor (2) in the hole of 7” record.

2. Fix Plate with 3 screws. (< head).

3. Insert D hole of the Adaptor (2) on the D shaft of the

Motor.

4. Insert the Adaptor (1) on the Adaptor (2).

q Aluminum Platter..............................................1

w Scratch Disc......................................................1

e Slip Mat ............................................................1

r Adaptor (1) ........................................................2

(One is for spare parts.)

Scratch Disc

(Groove side

DOWN)

D shaft

Slip Mat

Platter

Taper Boss

(Motor Unit)

Fig. 1

Scratch Disc

Adaptor (1)

Fig. 2

Fig. 3

Screw (< head)

Fixing Plate

7” (17 cm) record

Adaptor (2)

Fig. 1

Fig. 2

7” (17cm) Disc

Adaptor (2)

Adaptor (1)

Slip Mat

Adaptor (1)

CAUTIONS:

• Do not touch the motor unit.

• Do not turn on the power without Platter.

NOTE:

Please note the fall of Platter when you move DN-

S3500 after Platter is set.

como quitar el cuo para que la musica sea continua y no se pare de un tema a otro fracias
Submitted on 16-4-2022 at 12:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S3500 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denon DN-S3500 Manual

Product: