614639
31
Zoom out
Zoom in
Previous page
1/36
Next page
25
Getting started Connection
Playback
Troubleshooting Specifications Index
Others Preset
Preset function
Preset menu map
Setting items Description
Auto Cue Sets the detection level of the sound start point when ignoring the soundless part at
the head of a track at playback.
(A.CUEON*/A.CUEOFF)
Brake Time Setting the track end time
(STEP1/STEP2*/STEP3/STEP4)
Auto Close Time for automatically closing disc holder.
(CloseOFF/Close10s/Close30s*/Close1min)
Jump Time SelectthejumptimeofQuickJump.
(Jump10sec*/Jump20sec/Jump30sec/Jump1min)
P. Range Select the playing pitch range when the power is turned on.
(4%Range/10%Range*/16%Range/24%Range)
EOM Time Sets the notification for the time remaining until the end of the track being played back.
(EOMOFF/EOM10sec*/EOM15sec/EOM20sec/EOM30sec/EOM60sec/
EOM 90 sec)
Fader Mode Switches the operation for fader start for the mixer connected to this unit.
Select 1-line (TS) type cable (Play and Pause).
Select 2-line (TRS) type cable (CUE and Play)
(Play/CUE*/PlayPause)
Power Play Switches power on playback on or off.
Playback starts when the power is turned on if a disc is loaded.
(P.PlayON/P.PlayOFF*)
Pitch Select the pitch mode when the power is turned on.
(PitchON*/Key.AdjON(KEYADJUSTON)/PitchOFF)
Play Mode Select the play mode when the power is turned on.
(Single/Cont./PlayLock*)
Time Mode Select the time mode when the power is turned on.
(Elapsed*/Remain)
Bpm Disp Select the BPM display
(DispON*/DispOFF)
Relay Mode Switches relay playback on or off.
(RelayON/RelayOFF*)
Relay Time Select the crossover time the currently playing track when the opposite drive start to
play with the Relay Play function.
(RelayOsec*/Relay1sec/Relay2sec/Relay3sec)
Setting items Description
MemoClear MemoClear(MEMOALLCLEAR)
NOTE: This PRESET item can be only performed in CD1 (left side) of the remote
controller.
Clear all MEMO data in the non-volatile memory.
q To clear all MEMO data, press the
SEL. down.
“Clear OK?” flashes on the character display.
w Press the TRACK SEL. down again and select “OK” to execute clearing all MEMO
data.
“Memo Clear” is displayed on the character display while clearing.
e Onceclearingiscompleted,“Complete!”isdisplayed.
Version No The DN-D4500MK2’s software version is displayed.
(SYSTEM/DSP/SER/RC)
Preset Int Set all the preset data back to the factory defaults.
q To clear the PRESET data, press the
TRACK SEL. down.
“Initial OK?” flashes on the character display.
w Press the SEL. down. again and select “OK” to start clear the preset data.
“Preset Int” is displayed on the character display while data clearing.
e Once clearing is completed,
“Complete!”isdisplayed.
The “*” mark next to the data indicates the default value.
How to adjust the various Preset settings
1
Hold down •BACK –PRESET.
“PresetMode” is displayed.
2
Turn SEL. to select the setting item.
Press SEL. to enter the selected item.
3
Press •BACK –PRESET.
“Now Saving” is displayed.
Configuration is complete.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-D4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-D4000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info