13
ENGLISH
2 1-folder all-track repeat
1. Set the play mode to the single play mode.
2. In the stop mode, press the FOLDER button @2.
• The “FOLDER” indicator lights.
3. Turn the select knob !0 to select the folder you
want to listen to.
• The folder name scrolls on the display.
4. Press the REPEAT button !9.
• The “REPEAT 1” indicators light on the display
and the single track repeat mode is set.
5. Press the PLAY (
1) button y.
• Playback starts from the first track in the
selected folder.
• Once the last track in the selected folder has
been played, playback resumes from the
beginning of the first track in the selected
folder and the tracks are repeated.
✽ When the TIME button @0 is pressed during
playback, the track number of elapsed track
time are displayed. (The “FOLDER” indicator
do not turns off.)
(3)
Repeat playback
2 All track repeat
1. Set the play mode to the continuous play mode.
2. In the stop mode, press the TITLE button @1 to
turn on the “FILE” indicator.
3. Press the REPEAT button !9.
• The “REPEAT” indicators light on the display
and the all track repeat mode is set.
4. Press the PLAY (
1) button y.
• The disc is played repeatedly.
• Once the last track on the disc is played,
playback continues from the beginning of the
first track.
8
THE COMPACT DISC
• Do not allow fingerprints, oil or dust on the surface
of the compact disc. If the signal surface is dirty,
wipe it off with a soft, dry cloth. Wipe in circular
motions from the center and out.
• Do not use water, benzene, thinner, record sprays,
electrostatic proof chemicals, or silicone-treated
cloth to clean discs.
• Always use care when handling discs to prevent
damaging the surface, in particular when removing
a disc from the case and returning it.
• Do not bend compact discs.
• Do not apply heat to compact discs.
• Do not enlarge the hole in the center of the disc.
• Do not write on the disc and do not attach any
labels.
• Condensation will from on the disc surface if it is
brought into a warm room from a cold area, such as
outdoors during winter. Wait until the condensation
disappears. Never dry discs with hair dryers, etc..
Precautions on handling compact
discs
• After playing a disc, always return it to its case.
• Keep discs in the cases when they are not to be
played. This will protect them from dust and dirt and
prolong their service life.
• Do not store discs in the following places :
1) Places exposed to direct sunlight for a
considerable time.
2) Places subject to accumulation of dust or high
humidity.
3) Places exposed to high temperatures, such as
close to heater outlets.
Precautions on storage
9
POWER ON PLAYBACK
Playback starts automatically when the power is turned
on.
• The power on playback function can be set with the
“PRESET FUNCTIONS AND OPERATIONS” (See
page 14).
2 Single track repeat
1. Set the play mode to the single play mode.
2. Press the REPEAT button !9.
• The “REPEAT 1” indicators light on the display
and the single track repeat mode is set.
3. Turn the select knob !0 to select the file you
want to listen to.
• The file name scrolls on the display.
4. Press the PLAY button (1) y.
• Playback starts.
• Once the selected track ends, it is played
again from the beginning.
• The single track repeat mode can also be set
by pressing the REPEAT button !9 during
playback. The current track is played
repeatedly.
• To cancel the single track repeat mode, press
the REPEAT button !9 repeatedly until the
“REPEAT” indicator turns off.
10
EXPANDED FUNCTION
Multiple units of the DN-C635 or other DENON products (DN-780R etc.) can be used together for longer play
time, simultaneous recording and other functions.
2 CASCADE (MULTIPULE CONTINUOUS) OPERATION
• Refer to figure 1 to connect the equipment.
• Use a single RCA cable to connect the units’ CASCADE OUT jacks with the units’ CASCADE IN jacks.
• When the first and last units are connected as shown in figure 1, playback is performed endlessly.
• If the first and last units are not connected, operation stops at the last unit.
Cascade playback
1. Set the cascade mode of all unit to the “Cas=ON”. (Preset function)
2. Press the PLAY (1) button y on unit 1. Playback starts.
• Playback on unit 1 ends, playback starts on unit 2.
3. Playback stops when the stop button on the unit currently playing is pressed.
Figure 1
unit 1 DN-C635
unit 2 DN-C635
