516886
58
Zoom out
Zoom in
Previous page
1/64
Next page
Getting started Connections
Basic operations Advanced operations TroubleshootingTroubleshootingGlossary of termsInformation Specifications Index
52
If a problem occurs first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
If the symptom is not covered on the check list, contact your dealer or service centers.
Service centers are listed at http://www.d-mpro.com.
GGeneralH
Symptom Cause Countermeasure Page
Set does not
operate properly.
•External noise or interference is
causing the set to malfunction.
•Reset the microprocessor. 39
Display not lit
and sound not
produced when
power switched
to on.
•Power cord not plugged in
securely.
•Check the connections on
the set’s rear panel and the
connection of the power plug to
the power outlet.
8
Display lit but
sound not
produced.
•Wrong input source selected. •Select the appropriate input
source.
9
Display is off. •The Dimmer setting is set to
“Off”.
•Set to something other than
“Off”.
9
Power turns off
suddenly and
POWER indicator
flashes red.
(Flashes at 0.25
second intervals)
•Set is damaged. •Turn off the power and contact
a D&M Professional service
center.
“No Network
Connection” is
displayed.
•The network is not properly set
up.
•Select a source other than the
network function.
•Perform “Network First Setup.”
9
28
Remote control
does not work.
•The “IR Remote” setting is set
to “Disable”.
•Set the “IR Remote” setting to
“Enable”.
33
When the power
is in standby
mode, the power
indicator does not
light red.
•The “Auto Standby” setting is
set to “On”.
•The “Network Standby” setting
is set to “On”.
•Set the “Auto Standby” setting
to “Off”.
•Set the “Network Standby”
setting to “Off”.
8, 32
8, 11
Audio is not
output from the
BALANCED OUT
connectors or
UNBALANCED
OUT connectors.
•The audio output switch on the
front panel is “OFF”.
•Turn the audio output switch on
the front panel “ON”.
4
Troubleshooting
GTunerH
Symptom Cause Countermeasure Page
Continuous noise
is heard when
receiving FM
programs.
•Antenna cable is not properly
connected.
•Connect the antenna cable
properly.
•Connect an outdoor antenna.
6
Hissing or
continuous noise
is heard when
receiving AM
programs.
•ThismaybenoisefromaTVor
interference from a broadcast
station.
•TurnofftheTV.
•Change the position and
direction of the AM loop
antenna.
6
Display lit but
sound not
produced.
•When the input source is “FM”
or “AM”, audio is not output
from the digital out connector.
•Use the BALANCED OUT
connectors or UNBALANCED
OUT connectors.
4, 5
GInternet radio/Music server/iPod/USB memory deviceH
Symptom Cause Countermeasure Page
Music files
are not played
correctly.
•The size of the album artwork
image registered to the music
file is too large.
•The supported album art image
size for WMA, MP3, WAV, and
FLAC formats is 500 x 500 pixel
or smaller. For m4a format, the
supported image size is 349 x
349 pixel or smaller. If the image
islargerthanthesupportedsize,
the audio file may not be played
correctly.
When a USB
memory device
is connected,
“USB/iPod”isnot
displayed.
•ThesetcannotrecognizeaUSB
memory device.
•A USB memory device not
conforming to mass storage
class or MTP standards is
connected.
•A USB memory device that
thesetcannotrecognizeis
connected.
•USB memory device is
connected via USB hub.
•Check the connection.
•Connect a USB memory device
conforming to mass storage
class or MTP standards.
•This is not a malfunction. D&M
Professional does not guarantee
that all USB memory devices
will operate or receive power.
•Connect the USB memory
device directly to the USB port.
25
iPod cannot be
played.
•The input source is set to
something other than
“USB/iPod”.
•Cable is not properly connected.
•The iPod is connected to
this unit using an iPod cable
(commercially available) that is
longer than 2 m (6.6 ft).
•Switch the input source to
“USB/iPod”.
•Reconnect.
•Use a genuine cable or iPod
cable that is shorter than 1 m
(3.3 ft) to connect the iPod to
this unit.
9
23
23
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-700H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-700H in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info