516886
17
Zoom out
Zoom in
Previous page
1/64
Next page
Getting started ConnectionsConnections
Basic OperationsBasic operations Advanced operations TroubleshootingGlossary of termsInformation Specifications Index
11
Network First Setup
4
Set the DHCP.
DHCP (On)
[Setup Wired] 1/4
:enter :return
n When setting DHCP to “On”
Press p to select “On”, then press [ENTER], <1/3
ENTER
>.
n When setting DHCP to “Off”
q Press pi to select “Off”, then press [ENTER],
<1/3
ENTER>
.
w Use ui to select “IP Address”, then press [ENTER],
<1/3
ENTER>
or p.
e Use uip or [NUMBER] (0 – 9) to input the IP address and
press [ENTER], <1/3
ENTER>
.
r
Use uip or [NUMBER] (0 – 9) to input the address for “Subnet
Mask”, “Gateway”, “Primary DNS”, and “Secondary DNS”.
5
Set the Proxy.
If you do not connect to the network via a proxy, this setting is
not required. In this case, go to step 6.
q Press
ui to select “Proxy”, then press [ENTER],
<1/3
ENTER
>.
w If “Proxy(On)” appears, go to step r.
If “Proxy(Off)” appears, press [ENTER], <1/3
ENTER
> or p.
“Select Proxy” menu appears.
e
Use ui to select “On”, then press [ENTER], <1/3 ENTER> or p.
“Setup Proxy” menu appears.
r Use ui to select “Proxy (Address)” or “Proxy (Name)”, then
press [ENTER], <1/3
ENTER
> or p.
“Select Type” menu appears.
t Use ui to select “Address” or “Name”, then press [ENTER],
<1/3
ENTER
> or p.
“Setup Proxy” menu appears.
y Use ui to select “Address” or “Name”, then press [ENTER],
<1/3
ENTER
> or p.
“Input Proxy Address” or “Input Proxy Name” menu appears.
u Use uip or [NUMBER] (0 – 9) to input the address or name,
then press [ENTER], <1/3
ENTER
>.
“Setup Proxy” menu appears.
i Use ui to select “Port”, then press [ENTER], <1/3
ENTER
>
or p.
“Input Proxy Port” menu appears.
o Use uip or
[NUMBER] (0 – 9)
to input the port, then press
[ENTER] or <1/3
ENTER
>.
The Proxy settings are completed.
6
Select “Connection”, and press [ENTER] or
<1/3
ENTER
>.
Connection
[Setup Wired] 3/4
:enter :return
Connecting...
[Connection]
Succeeded
•Connected to the network.
e
Setting the network standby
n Enabling the network standby
Network is on during standby. Main unit operable with a network
compatible controller. Shortens the time before the network
connection is completed.
•More power is consumed when in standby
(Power consumption: 6.5 W).
Select “On”, and press [ENTER] or <1/3
ENTER
>.
Reduces the amount of time until the network connection is
complete.
Network On
[Select Standby Mode] 1/2
Network start time is fas
NOTE
The amount of power consumption during standby mode increases
slightly.
n Disabling the network standby
Suspend network function during standby. It will take slightly
longer till the network connection is completed.
•The minimum amount of power is consumed when in standby
(Power consumption: 0.5 W).
•This is the default setting.
Select “Off”, and press [ENTER] or <1/3
ENTER
>.
The amount of power consumption during standby mode is as low
as possible.
Network Off
[Select Standby Mode] 2/2
The lowest power consump
This completes the network connections and settings.
The network settings can also be configured in the “Network” –
“Connection” menu. Refer to “Connecting wired LAN” (vpage29)
for more information.
To perform “Network First Setup” again
1
Press [MENU].
The menu screen is displayed.
2
Select “Network”, and press [ENTER] or
<1/3
ENTER
>.
Network
[Menu] 1/3
:enter :return
3
Select “Network First Setup”, and press [ENTER] or
<1/3
ENTER
>.
Network First Setup
[Network] 1/6
:enter :return
See the illustration on the previous page for details of the buttons used for
the operations on this page.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-700H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-700H in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info