516878
33
Zoom out
Zoom in
Previous page
1/86
Next page
26
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Playback pitch adjustment (Pitch control)
The playback speed can be adjusted within a range of –16 % to +16
%.
By adjusting the pitch, you can listen to recordings over a shorter time
span, or listen more slowly.
1
Press PITCH while holding down SHIFT during
playback or when stopped.
A pop up is displayed and the pitch adjustment is enabled.
2
Press PITCH + or PITCH – while holding down
SHIFT.
•The pitch changes by 0.1 % each time the button is pressed.
•Press and hold the button to change the pitch continuously.
•To cancel the pitch control, press PITCH again while holding down
the SHIFT button.
n Changing the playback speed without changing
the musical interval
(Master Key)
When the playback speed is adjusted using the pitch control, the
musical interval changes according to the playback speed. With the
Master Key function on, you can play back music without changing
the musical interval even when you change the pitch.
•The Master Key setting is performed in“Master Key”
(vpage17) in the preset menu.
•If “Master Key” in the menu is set to “On”, the master key mark
appears in the display when the pitch is adjusted.
012:34;56
123:45;67
TITLE:SONG0123
ARTIST: SINGER
+
12.3%
PITCH
OFF M
RCU
ACU
EOM
44K
232
Sam
p
le12345678.MP3
Master Key Mark
Operations during playback
Single playback or continuous playback
(Single/Cont.)
Select whether to playback one track or to playback continuously.
Press SINGLE/CONT. during playback or while stopped.
The icon on the screen changes.
CNT: Continuous playback
SGL: Single track playback
Direct jump
GOperations on the UnitH
1
Press TRK NO.
A pop up is displayed.
2
Rotate the jog dial to select a track number.
In 1 second, playback moves to the selected track.
•To select a number from the 10th and subsequent tracks, select
the first digit -> press the jog dial -> select the second digit.
GOperations on the remote controlH
While stopped, press the number buttons on the remote control (
0
to 9) to jump directly to the track you want to hear.
To select the 10th and subsequent tracks, push the number buttons
in the order of 10 digit -> 1 digit.
E.g. Playing back track 12
q
Press the number button 1. w Press the number button 2
within one second.
Changing the output level
Changes the output level of both analog and digital outputs.
GOperations on the UnitH
Hold down the SHIFT button and rotate the jog dial.
GOperations on the remote controlH
Press the VOL + orbutton.
Rewind a specified amount of time and
playback (Skip back)
The track is rewound for the set amount of time from the current
playback position during playback or pause from an operation on an
external remote (parallel, RS-232C).
The skip back time setting is set in “Skip Back” in the “Preset
Settings” (vpage16).
GParallel ControlH
When the parallel input normal mode is set, press the
skip back switch on the connected device.
For details, see “Parallel Control” (vpage54).
GRS-232C ControlH
Send a skip back command.
For details, refer to “RS-232C control” (vpage48)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-700C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-700C in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info