516878
25
Zoom out
Zoom in
Previous page
1/86
Next page
18
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
Setting Defaults
n System Setting
Item Setting Details (Items in bold are factory default)
Mono Off: Channel output based on the input source.
On: Forced monaural output.
Output Rate Auto: Audio output based on the rate of the input media or file.
44.1k:Audiooutputat44.1kHz.
48k:Audiooutputat48kHz.
Auto Sleep
Sleep is stopping the
CD reading.
Off: Does not function.
30 sec: Switches to sleep mode if there are no operations for 30 seconds.
10 min: Switches to sleep mode if there are no operations for 10 minutes.
20 min: Switches to sleep mode if there are no operations for 20 minutes.
30 min: Switches to sleep mode if there are no operations for 30 minutes.
Volume Output Fixed (0 dB): Output audio control is fixed at 0 dB.
Variable: Output audio control is variable.
Ref (XLR/RCA) +24 dBu/+10 dBV: XLR=+24 dBu / RCA=+10 dBV
+20 dBu/+6 dBV: XLR=+20 dBu / RCA=+6 dBV
+18 dBu/+4 dBV: XLR=+18 dBu / RCA=+4 dBV
+6 dBV/+6 dBV: XLR=+6 dBV / RCA=+6 dBV
Trim L
+2.0 dB - –2.0 dB: Adjusts the left channel in 0.1 dB steps. Initial value is “0 dB”.
Trim R
+2.0 dB - –2.0 dB: Adjusts the right channel in 0.1 dB steps. Initial value is “0 dB”.
Display Contrast 1 to 10: 1 is the darkest, 10 is the brightest. Initial value is “5”.
IR Remote On: Receives IR remote commands.
Off: Does not receive IR remote commands.
Serial Bit Rate 9600: 9600 bps
38400: 38400 bps
Serial Protocol MIDI: Conforms to MIDI controls.
RC: Conforms to D&M RC protocol.
Machine Name
z
DN-700C: Displays the UPnP device name. (Maximum 12 characters)
IP Address
z
Auto: DHCP is assigned automatically.
Static: Specify a fixed IP address. When selected, the fixed address is displayed.
Subnet Mask
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
Gateway
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
DNS Server
z
None: The IP address is not displayed and cannot be configured when “IP
Address” is set to “Auto”.
Static: 0.0.0.0 - 255.255.255.255
Network Standby Off: Only Front Sub u-Con operates (low power operation).
On: The display section and LEDs of the DN-700C are off, but power is supplied.
Password ****: Sets a password (6 to 12 characters) for system settings and using the
web. Displayed as “****” when set.
Default value is “NULL”.
Default Resets all of the system settings to the defaults.
z Restart the DN-700C after changing this setting.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-700C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-700C in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info