370630

Denon dht-m330dv Manual

39
Zoom out
Zoom in
Previous page
1/60
Next page
39
ENGLISH
(6) Setting the speaker distance
• Input the distances from the listening position to the speakers and set the surround delay time.
• The default settings below are set upon shipment from the factory.
Preparations:
Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right).
FRFL
SRSL
Center
L2
L1
L3
L1: Distance from center speaker to
listening position
L2: Distance from front speakers to
listening position
L3: Distance from surround speaker to
listening position
Listening
position
2, 44
1, 3, 5
1
Press the CH.SELECT button on the
remote control unit.
• The following is displayed:
2
Use the select 1 button while the above
is displayed to select “DELAY”.
• The level display shown below
appears.
Remote control unit
Remote control unit
LLEVE </ LD>E YA
FSRT/ W< 81 .>m
3
Press the CH.SELECT button on the
remote control unit to select the speaker
whose distance is to be set.
The mode switches as follows each
time the CH.SELECT button is
pressed:
4
While the delay time is displayed, use
the select and buttons to set the
distance between the speaker and
listening position.
• The value changes in units of 0.3
meters each time the select or
button is pressed. Select the value
closest to the actually measured
distance.
Remote control unit
Remote control unit
FRONT/SW CENTER
(END)
SURROUND
• When the 6.1- or 7.1-channel mode is set, the surround
back channel can also be selected and adjusted.
Make sure the difference of the distances set for the
different speakers is no more than 4.5 meters.
If an inappropriate distance is set, the distance display will
flash. Change the position of the speaker and reset.
5
Once the settings are completed, use
the CH.SELECT button to select “END”.
The settings are completed if no
operations are performed for several
seconds.
• The display returns to normal.
Remote control unit
• Operate the remote control unit at the “AMP” position.
Set the remote
control selector
switches
Switch1 to DVD
Switch2 to AMP
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon dht-m330dv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon dht-m330dv in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info