370630
35
Zoom out
Zoom in
Previous page
1/60
Next page
35
ENGLISH
[2] 2-channel mode settings
In the AUTO DECODE mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play
in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set
with the 2-channel mode setting (Auto Stereo, Dolby Pro Logic II Cinema, Dolby Pro Logic II Music and Dolby Pro Logic II Game).
For analog and PCM sources, it is also possible to select DTS NEO:6 Cinema and DTS NEO:6 Music.
When the function is set to TAPE or TUNER, the “Auto Stereo” 2-channel mode cannot be selected. To play in stereo, set the
surround mode to “STEREO” (page 29).
NOTES:
The 2-channel decode mode cannot be set when Dolby Digital
5.1-channel signals or DTS signals are being input.
Once the surround parameters have been set, stop operating
buttons. After several seconds the display returns to normal and
the settings are automatically validated.
1
2
33
123
1
Set the surround mode to “AUTO DECODE”.
•“AUTO DECODE” is displayed, then the normal display
reappears.
Remote control unitMain unit
or
If the mode is set to anything other than AUTO DECODE,
the AUTO DECODE mode can be set using the AUTO
DECODE button on the remote control unit.
2
Press the SURROUND PARAMETER button on the remote
control unit and select the 2-channel decode mode.
Remote control unit
Main unit
This can be selected when the digital input consists of no
signal, PCM signals, Dolby Digital 2-channel signals, as
well as when the analog input is selected.
3
Select the desired 2-channel decode mode using the ( and
) SELECT buttons.
The mode switches as follows each time one of the buttons
is pressed:
Remote control unit
DTS NEO:6C and DTS NEO:6M can be selected for analog
and PCM sources.
The Auto Stereo mode can be selected when the function
is set to DVD, TV/AUX1 or AUX2.
AUTO ST
DTS Neo:6M DTS Neo:6C
PL CPL M
PL G
Set the remote
control selector
switches
Switch1 to DVD
Switch2 to AMP
Main unit
Operate the remote control unit at the “AMP” position.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon dht-m330dv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon dht-m330dv in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info