498794
13
Zoom out
Zoom in
Previous page
1/35
Next page
10
Turning the power on
Before using a remote control unit, insert the batteries (vpage23
“Inserting the batteries”).
Press CD X to turn on power to the
unit.
•The power indicator lights green and the
power turns on.
•The “NO DISC” message is displayed if a disc is not loaded.
When power is switched to standby
Press CD X.
The power is set to the standby mode.
GPower indicator statusH
•Normal standby : Red
•Auto standby : Off
•iPod charge standby : Orange
n Turning the power off
Press X on the main unit.
•The power indicator turns off, and so does the power.
•Be sure to stop playback before turning the power off.
•Make sure that the disc tray is completely shut before turning off
the power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods
of time or when going on vacation, either press X on the main unit to
turn off the power, or unplug the power cord from the power outlet.
Playback
Setting the top priority playback layer for Super Audio CDs
•The layer that is played with priority when the disc is loaded can be
set.
•Upon purchase, the priority layer is set to the “STEREO”.
1
Press CD X to turn on power to
the unit.
2
Check that no disc is loaded.
•If the layer is switched while the disc is being loaded, the playback
layer switches for that disc, but the top priority playback layer
setting itself does not change.
3
Press SOURCE to set the playback media mode to
“DISC”.
4
Press DISC LAYER and switch to the layer you want
to set (Super Audio CD only).
STEREO MULTI
CD
STEREO
Plays back the 2-channel area of the Super Audio
CD (the default setting).
MULTI
Plays back the multi-channel area of the Super
Audio CD. The analog output of the DCD-2020AE
outputs a down-mixed 2-channel signal.
CD
Plays back the CD layer of the Super Audio CD.
•When a disc is loaded after the setting has been made, the contents
recorded on the set layer are displayed.
•If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
•This setting is stored in the memory and is not cleared even when
the disc holder is opened or closed or the power is turned off. To
change the setting, repeat the procedure above.
• The priority playback layer cannot be set when a disc is inserted or
“OPEN” is shown on the display.
• During playback of the multi-channel area, the analog output of the
DCD-2020AE plays back a 2-channel downmix.
• If the area and layer have not been set for a disc, the priority playback
order is as follows:
q STEREO w MULTI e CD
• This setting is memorized by the DCD-2020AE and is retained even
if the disc tray is opened/closed or the power is switched on/off.
Please reconfigure the settings if you wish to change them.
Operations
Information
Operations
Preparations
CD
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DCD-2020AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DCD-2020AE in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DCD-2020AE

Denon DCD-2020AE User Manual - German - 35 pages

Denon DCD-2020AE User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info