498793
11
Zoom out
Zoom in
Previous page
1/24
Next page
ENGLISH
7
Getting started
Basic connections Basic operation Specifi cations IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
DISC LAYER
SOURCE
<ON/STANDBY / OFF>
DISC LAYER
SOURCE
[CD POWER]
Disc tray
Basic operation
Before use
Setting the top priority playback layer for
super audio CDs
The layer that is played with priority when the disc is loaded can be
set.
Upon purchase, the priority layer is set to the “STEREO”.
1
Turn the power on.
(Press <ON/STANDBY / OFF>.)
2
Check that no disc is loaded.
If the layer is switched while a disc is in the player or the disc tray
is opened,the playback layer switches for that disc, but the top
priority playback layer setting itself does not change.
3
Press SOURCE to set the playback media mode to
“DISC”.
4
Press DISC LAYER and switch to the layer you want
to set (Super Audio CD only).
STEREO MULTI
CD
[Selectable items]
STEREO
: Plays back the 2-channel area of the Super Audio
CD (the default setting).
MULTI
: Plays back the multi-channel area of the Super
Audio CD. The analog output is altered to a down-
mixed 2-channel signal.
CD
: Plays back the CD layer of the Super Audio CD.
When a disc is loaded after the setting has been made, the contents
recorded on the unit layer are displayed.
If a disc that does not contain the layer set for top priority playback
is loaded, the contents recorded on another layer are displayed
automatically.
This setting is stored in the memory and is not cleared even when
the disc holder is opened or closed or the power is turned off. To
change the setting, repeat the procedure above.
During playback of the multi-channeled source, the analog output of
the unit plays back a 2-channel downmix.
If the area and layer have not been set for a disc, the priority playback
order is as follows:
q STEREO w MULTI e CD
This setting is memorized and is retained even if the disc tray is
opened/closed or the power is switched on/off. Please reconfi gure
the settings if you wish to change them.
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
Make sure that the disc tray is completely shut before turning off the
power.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press <ON/STANDBY / OFF> to
turn off the power, or unplug the power cord from the power outlet.
Basic operation
Turning the power off
1
Press [CD POWER].
The power is set to the standby mode.
2
Press <ON/STANDBY / OFF>.
The power indicator turns off, and so does the power.
1.DCD1510AEE2_ENG_009.indd 7 2010/02/24 8:20:57
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DCD-1510AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DCD-1510AE in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info