584582
56
Zoom out
Zoom in
Previous page
1/69
Next page
InformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started Specications
ENGLISH

If a problem should arise, rst check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem
persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Troubleshooting
Symptom Cause / Countermeasure Page
Power does not turn
on.
Check if the power cord is properly connected.
Plug the power supply cord into the power outlet.
The safety protection device may be activated. Unplug the power
cord once, and wait for 5-10 seconds and then plug it in again.
DBP-4010UDCI enters the standby status by safety function when
the fan stops. Check the back of the set if something is disturbing
the fan rotation.
20
3, 9
Unable to play back
BD-LIVE / bonus view.
Does the SD Memory Card has more than 1GB of available space?
Has the SD Memory Card been initialized by the DBP-4010UDCI?
Was the SD Memory Card inserted while the power of the unit
is on. (Insert the SD Memory Card while the DBP-4010UDCI is in
the standby status.)
Remove the write protection of an SD Memory Card.
4, 36
31
4, 36
Picture does not
appear.
Switch the TV's input setting to the external input connected to
the player.
Is the Pure Direct function set to “On”? Set to “Off”.
Also, is “Pure Direct SetupVideo Outon the GUI menu set
to Offat the “User Preset 1” or “User Preset 2” setting? Set it
to “On”.
Is HDMI mode set to “HDMI On”? In this case, video signals are
output from the video, S-Video and HDMI terminals, but not from
the component terminals.
Check the connection of the video/S-Video/component video cable.
Is the GUI menu “HDMI Setup“I/P Direct” set to On”? In this case,
no video signals are output from the video and S-Video terminals
during playback of certain discs.
Does the Video Setup“Component Resolution” setting on the
GUI menu match the connected device's resolution? Set it so that
it matches.
28, 38
13
18
23
24
Symptom Cause / Countermeasure Page
Video and audio are
not output with HDMI
connection.
Check the connection of the HDMI cable.
Is the “HDMI” indicator of the display of the DBP-4010UDCI
lighting?
Is the Pure Direct function set to “On”? Set to “Off”.
Also, is “Pure Direct SetupVideo Outon the GUI menu set
to Offat the “User Preset 1” or “User Preset 2” setting? Set it
to “On”.
Is HDMI mode set to “HDMI Off”? In this case, video signals are
output from the video and S-Video terminals, but not from the HDMI
terminal.
Check whether the connected display device or other device
supports HDCP. This unit will not output a video signal unless the
other device supports HDCP. See the owner’s manual of your TV,
AV Amp, etc.
Check that the setting of the HDMI video resolution supports the
resolution of the connected device. When set to Auto”, DBP-
4010UDCI makes the setting automatically.
13
8
28, 38
13
15
13
HD audio is not
output.
Set “BD Audio Mode” to “HD Audio Output”. 32
Picture is not
displayed or is
disturbed.
Picture of a BD-Video
or DVD-Video disc is
in black and white.
The picture may be slightly disturbed directly after fast-forwarding
or reversing. This is not a malfunction.
Connect the DBP-4010UDCI’s video/S-Video/component video
output either directly to the TV or to the TV via the AV Amp. Do
not connect via a VCR (video cassette recorder). Some discs
include copy prohibit signals, and when such discs are played
via a VCR, the copy guard system may cause the picture to be
disturbed.
Is a disc that is not compatible with the player or a disc with
a different region number loaded? (This player supports region
code “A” for BD-Video discs, “1” or “ALL” for DVD-Video discs.)
Is the GUI menu “HDMI Setup“I/P Direct” set to On”? In this case,
no video signals are output from the video and S-Video terminals
during playback of certain discs.
18
3
23
Troubleshooting
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DBP-4010UDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-4010UDCI in the language / languages: English as an attachment in your email.

The manual is 11,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info