584582
36
Zoom out
Zoom in
Previous page
1/69
Next page
ENGLISH

TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Specications
Setting items
Setting
contents
Default
DNR
Reduce noise in the entire
picture.
0 ~ +3 0
Contrast
Adjust picture contrast.
6 ~ +6
0
Brightness
Adjust picture brightness.
0 ~ +12 0
Enhancer
z
3
Strengthens the contours of
the picture.
0 ~ +11 0
Gamma Correction
z
1
Adjust video brightness in
detail.
G0 ~ 9
G0 = 24 / G1 = 32
G2 = 48 / G3 = 64
G4 = 80 / G5 = 96
G6 = 128 / G7 = 160
G8 = 192 / G9 = 224
Sharpness (medium range)
z
1, 3
Adjust picture sharpness
for the medium frequency
range.
6 ~ +6
0
Sharpness (high range)
z
3
Adjust picture sharpness for
the higher frequency range.
–6 ~ +6 0
Hue (color tone)
z
4
Adjust the green and red
color balance.
–6 ~ +6 0
White Level
Adjust the white level.
–5 ~ +5 0
Black Level
z
3
Adjust the black level.
–5 ~ +5 0
Chroma Level
Adjust the color density.
–6 ~ +6 0
Setup Level
z
2
Adjust the black areas of the
image.
0 IRE
7.5 IRE
7.5 IRE
H.Position
z
3
Adjust the left/right position.
–7 ~ +7 0
V.Position
z
3
Adjust the top/bottom
position.
–7 ~ +7 0
You can adjust the picture quality to your liking.
You can store up to a maximum of 5 values in memory.
When Finishing Picture Adjustment
Press during picture adjustment.
When Outputting Standard Picture Quality without
Using Picture Adjustment
Press and to select “Standard” and then press .
n
n
About Gamma Correction
When you select “Gamma Correction”, and then press , you can
change the setting with .
In the example of the graph below, the horizontal axis shows the
brightness level of the pictured recorded on the disc. The vertical axis
shows the brightness of the picture output by the DBP-4010UDCI.
Gamma CorrectionMemory 5
0
0
255
255
G0:024
On adjusting the brightness on the output side of bright parts on
the disc side, the normally hard to see bright parts become clearly
discernible images.
Gamma CorrectionMemory 5
0
0
255
255
G0:024
On adjusting the brightness on the output side of dark parts on
the disc side, the normally hard to see dark parts become clearly
discernible images.
Resuming Initial Values after Gamma
Correction
Press while a graph is displayed.
n
The picture adjustment set values are retained in memory even after
the power is turned off.
Adjusting the Picture Quality (Picture Control)
1
Press .
The currently set status is displayed.
2
Select the memory number you want (“Memory 1” ~
“Memory 5”) with , and then press .
Standard
Memory 1
Memory 5
PICT
3
Select the item you want to change
with .
Memory 1
DNR
Contrast
V.Position
0
0
0
4
Change the setting with .
Refer to the table on the right regarding contents of items which
can be set.
b
Setup
z1This is not available for HDMI output.
z2 Effective only for the 480i video signal from the video output terminal, S
video output terminal, and component video output terminal.
z3 This has no effect with the video and S-Video outputs.
z4 This has no effect with the video and S-Video outputs when playing PAL
video.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DBP-4010UDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-4010UDCI in the language / languages: English as an attachment in your email.

The manual is 11,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info