584582
17
Zoom out
Zoom in
Previous page
1/69
Next page
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH

1. Home Theater Playback – Playing Back Using Multi-channel System –
Setting HDMI Audio Output
When you press and set “HDMI Setup– “Audio Setupto “Auto” (vpage 23) on the GUI menu,
audio mode is set according to the connected device.
When you want to set the HDMI audio output separately, change according to the following table.
Refer to the owner’s manual of the connected device regarding HDMI audio input specications
compatible with the connected device.
Device to be connected Setting items About output signal and speaker settings
Device with the following
built-in decoder
Dolby TrueHD
Dolby Digital Plus
Dolby Digital
DTS-HD
DTS
·
·
·
·
·
Auto
DBP-4010UDCI outputs a bitstream signal that is decoded
by the connected device.
In this case, you cannot make a speaker setting for HDMI
audio with the DBP-4010UDCI.
Make the setting with the connected device.
When outputting the Dolby TrueHD or DTS-HD audio,
press and set “BD Audio Mode” to “HD Audio
Output” (vpage 32).
b
b
Device compatible with
multi-channel HDMI audio
input, but not capable of
speaker setting for each
channel
Multi LPCM
BM On
Outputs multi-channel Linear PCM audio signals with
speaker setting by the DBP-4010UDCI.
For speaker setting, on the GUI menu, Audio Setup
“7.1ch Audio Out”– “Multi Channel” “Speaker
Conguration” (vpage 25).
BM : Bass Management (means multi-channel speaker
setting)
b
b
Device compatible with
multi-channel HDMI audio
input, and capable of
speaker setting for each
channel
Multi LPCM
BM Off
Output of multi-channel Linear PCM audio signals from the
DBP-4010UDCI.
Perform the speaker setting with the connected device.
BM : Bass Management (means multi-channel speaker
setting)
b
Device compatible with 2-
channel HDMI audio input
2Ch
Downmixed 2-channel Linear PCM audio signals are output
from the DBP-4010UDCI.
Perform the speaker setting with the connected device.
Device not compatible with
HDMI audio signal input
Mute
Audio signal are not output from the DBP-4010UDCI’s
HDMI terminal.
Only video signals are output from the HDMI terminal.
Make the audio connection.b
NOTE
When the HDMI video resolution is set to “1080P24”, HDMI video signals are output from the DBP-
4010UDCI with a resolution of 1080P and a frame rate of 24 frames per second, regardless of the video
signals on the disc being played. Because of this, when playing discs containing video signals recorded
with a frame rate of something other than 24 frames per second, the movement of the picture may be
unnatural. If this happens, set the HDMI video resolution to something other than “1080P24”.
When the “I/P Direct” (vpage 23) setting is “On” and a disc with a frame rate of 24 frames per second
is played, no video signals are output from the video or S-Video outputs.
When the “I/P Direct” (vpage 23) setting is “Off”, “1080P24” is not displayed.
Audio signal from the HDMI output terminal
You can change the audio format and playback number of channels according to the specications of
the device to which the DBP-4010UDCI’s HDMI audio output signals are input. Make settings while
checking the specications of the audio device to be connected as well as the audio format/number
of channels stored in media and les for playback.
n
Media/Files Audio format
Setting “HDMI Setup” – “Audio Setup” (vpage 23) on
the GUI menu
Auto
Multi LPCM
BM On/Off
2Ch
BD
Dolby Digital
Dolby Digital
z1
Multi LPCM
2 ch Downmix
LPCM
Dolby Digital Plus
Dolby Digital Plus
z1
Dolby TrueHD
Dolby TrueHD
z
1
DTS
DTSz1
DTS-HD
DTS-HDz1
LPCM Multi LPCM
AVCHD
Dolby Digital Dolby Digital
Multi LPCM
2 ch Downmix
LPCM
LPCM Multi LPCM
DVD-Video
Dolby Digital Dolby Digital
DTS DTS
LPCM 2 ch LPCM
DVD-Audio LPCM, PPCM
Multi LPCM
2 ch Downmix
LPCM
Super audio CD
z2
Multi area
Stereo area
2 ch LPCM
CD layer
DivX
®
Dolby Digital Dolby Digital Multi LPCM
2 ch Downmix
LPCM
MP3, MP2
2 ch LPCM
CD, MP3, WMA, AAC, LPCM
DTS-CD DTS Multi LPCM
2 ch Downmix
LPCM
z1 :
Multi LPCM signals are output when “BD Audio Mode” is set to “Mix Audio Output ” (
vpage 32).
Multi LPCM signals are output when outputting HDMI video signals with resolutions of 480i/576i or
480p/576p.
z2 :
Super Audio CD audio signals are output at 44.1 kHz 16-bit.
Even if “HDMI SetupAudio Setupon the GUI menu is set to Auto” (vpage 23), multilinear PCM
or downmixed 2-channel linear PCM signals are output if a device that does not support bitstreams is
connected.
Connections
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DBP-4010UDCI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-4010UDCI in the language / languages: English as an attachment in your email.

The manual is 11,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info