451156
34
Zoom out
Zoom in
Previous page
1/74
Next page
30
ENGLISH
R
L
R
L
Internet
To WAN side
Modem
To LAN port
To LAN port
LAN port/
Ethernet
connector
Computer
TV
Router
n System requirements
Internet connection via broadband.
Modem
A device that connects to the broadband and conducts communications on the Internet.
Some modems also incorporate a router.
Router
When using the unit, we recommend a router with the following features.
Built-in DHCP (Dynamic Host Configuration Protocol) server.
This function automatically assigns an IP address on the LAN.
Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)
Computer (recommended system)
OS
Windows
®
XP Service Pack2 or more or Windows Vista
Software
Server software supporting Windows Media Player ver.11 or DLNA.
Ethernet cable (CAT-5 or greater recommended)
An ethernet cable is not included with the unit.
Use only shielded STP or ScTP LAN cable which is available at retailer.
We recommend a shielded straight cable (normal type) for Ethernet connections.
If you use the flat type or a non-shielded cable, the noise may adversely affect other devices.
n Checking the network connection
After connection, test the Internet connection with “Connection Test” in “Network” on the GUI menu
(vpage38).
If “Network is FAILED.” is displayed in the test, check the IP address with “Network” in “Information”
on the GUI menu, then set “DHCP” to “Manual” (vpage38).
The unit can use the DHCP function to automatically set up the network.
When setting up your network manually, after subscribing to an ISP, make the settings according to
directions in “Network” on the GUI menu (vpage38).
If you connect the unit to a network without a DHCP function, conduct IP address and other settings
according to “Network” on the GUI menu (vpage38).
The unit does not support PPPoE. If you subscribe to a service that is set with PPPoE, a PPPoE
compatible router is required.
When setting up the network manually, consult with your network administrator for the settings to
make.
n Registering the connected device for the network
For playing files stored on a device connected via a network, the device must have the unit registered
in advance.
For registering, refer to the operation manual supplied with the server.
For Internet connections, use an ISP (Internet Service Provider). Ask your local dealer for details.
NOTE
Do not connect an ETHERNET connector directly to the LAN port/Ethernet connector on your
computer.
It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a
broadband connection, there is no need to subscribe anew.
The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.
DENON assumes no responsibility whatsoever for any communication errors or problems resulting
from customer's network environment or connected devices.
Connecting to a network
1.DBP2012E2_ENG_10A.indd 30 2011/07/22 17:25:15
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DBP-2012UD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-2012UD in the language / languages: Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 11,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DBP-2012UD

Denon DBP-2012UD User Manual - English - 74 pages

Denon DBP-2012UD User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info