Manual Denon DBP-2010CI (page 37 of 52) (English)

584580

Zoom out

Zoom in

1/52

Function Setup Function Setup

ENGLISH

Introduction Connections Playback Function Setup Others

To make the most of its feature, set up your speakers appropriately by referring to the table below.

Speaker setting options are available at the following locations;

(Available when you have HDMI cable connected to the HDMI OUT jack)

SETUP A Quick A HDMI Audio Out A HDMI Multi(LPCM)

SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)

SETUP A Quick A 7.1ch Audio Out A Multi Channel

SETUP A Custom A Audio A 7.1ch Audio Out A Multi Channel

How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting

1) Use [U/V] to select the menu item.

2) Use [U/V] to select setting items.

•Use [RETURN] to go back to the previous screen.

3) Use [Y/Z] to select desired options.(Except for “Test Tone” and “Default”.)

For “Test Tone”:

Use [Y/Z] to select “Manual” or “Auto”, then press [ENTER].

• The test tone will be output. If you select “Manual”, use [U/V] to select desired speaker, then use

[Y/Z] to adjust the volume. If you select “Auto”, use [Y/Z] to adjust the volume of the speaker

that output the test tone.

• If you want to stop the test tone, press [RETURN].

For “Default”:

Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time”

setting to the default.

4) Press [SETUP] to exit.

• For “Speaker Configuration” setting, the settings of each speaker size may be adjusted

automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set

“Center”, “Surround” and “Surround Back” to “Large”.)

• If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Configuration” to

“None”.

• “None” for “Center”, “Subwoofer”, “Surround” and “Surround Back” is not available for the speaker

setting for the audio signal output from the HDMI OUT jack .

Menu Setting items Options Descriptions

Speaker Configuration

Select the desired

speaker to set. Then

change the setting

appropriately by

referring to the

descriptions.

Front Large* Large:

For the large speakers

with strong low frequency

reproduction capabilities.

Small:

For the small speakers

which do not provide

strong bass sound.

None:

No speakers.

For “Subwoofer” there is

only “On” or “None”.

Small

Center Large*

Small/None

Subwoofer On*

None

Surround Large*

Small/None

Surround Back Large*

Small/None

Default Select “Default”, then

press [ENTER] to reset the

“Speaker Configuration”

setting to the default.

Menu Setting items Options Descriptions

Channel Level

Tests or sets the

volume for each

speaker.

Test Tone:

“Test Tone” is the test

tone which can be

output from the

speakers so that you

can adjust the volume

for each speaker.

Off* Select “Off” to deactivate

the “Test Tone” feature.

Select “Manual”, then

press [ENTER] to manually

set the volume for the

desired speaker.

Select “Auto”,then press

[ENTER] to automatically

output the test tone from

each speaker.

Manual

Auto

Front Lch 0 dB to -12 dB

(0 dB*)

If you have selected

“Manual” in “Test Tone”,

select the desired speaker

to set and adjust the

volume for the selected

speaker.

If you have selected

“Auto” in “Test Tone”, test

tone will be output

automatically in order.

Adjust the volume of the

speaker that output the

test tone.

Center 0 dB to -12 dB

(0 dB*)

Front Rch 0 dB to -12 dB

(0 dB*)

Surround Rch 0 dB to -12 dB

(0 dB*)

Surround Back Rch 0 dB to -12 dB

(0 dB*)

Surround Back Lch 0 dB to -12 dB

(0 dB*)

Surround Lch 0 dB to -12 dB

(0 dB*)

Subwoofer 0 dB to -12 dB

(0 dB*)

Default Select “Default”, then

press [ENTER] to reset the

“Channel Level” setting to

the default.

Remote control operation

buttons

:Displaying the menu

Cancel the menu

:Move the cursor

(Up/Down/Left/Right) : Confirm the setting : Return to previous menu

E5KA0UD_EN.book Page 34 Tuesday, April 28, 2009 11:15 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-2010CI in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denon DBP-2010CI Manual

Product: