584580
17
Zoom out
Zoom in
Previous page
1/52
Next page
14
Connections
ENGLISH
Connections
ENGLISH
Introduction Connections Playback Function Setup Others
Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 28.)
Connection to a Device with 2-channels of Analog Audio Inputs
Supplied cables used in this connection are as follows:
RCA audio cable (L/R) x 1
Note
When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to
page 33). For software recorded in multi-channel, analog signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs
Supplied cables used in this connection are as follows:
RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
HDMI OUT
ETHERNET
AC IN
COAXIAL
COMPONENT VIDEO OUT VIDEO OUT
DIGITAL OUT
( PCM / BITSTREAM )
ROOM TO ROOM
REMOTE CONTROL
RS-232C
STRAIGHT CABLE
2ch AUDIO OUT
L
SBR
FR SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
2ch AUDIO OUT
LR
R
L
AUDIO IN
audio
this unit
RCA audio cable
Stereo component
CENTER
SUB-
WOOFER
R
SURROUND
L
R
SURROUND
BACK
L
R
L
ROOM
O
NTROL
E
2ch AUDIO OUT
L
SBR
FR SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
FRONT
AV amplifier
audio
this unit
Note
If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L)
jacks, then set “Surround Back” in “Speaker Configuration” to “None”.
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
After connecting to the Internet, set up necessary network settings.
Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the
unit.
If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
Do not connect your PC directly to the ETHERNET terminal of this unit.
Telecommunications
equipment (modem, etc.)
HDMI OUT
ETHERNET
AC IN
COAXIAL
COMPONENT VIDEO OUT VIDEO OUT
DIGITAL OUT
( PCM / BITSTREAM )
ROOM TO ROOM
REMOTE CONTROL
RS-232C
STRAIGHT CABLE
2ch AUDIO OUT
L
SBR
FR SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
LAN WAN LAN
12345
ETHERNET
Teleco mm uni cations
equipment (modem, etc.)
Hub or broadband router
LAN cable LAN cable
this unit
Internet
E5KA0UD_EN.book Page 14 Tuesday, April 28, 2009 11:15 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DBP-2010CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DBP-2010CI in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info