584418
100
Zoom out
Zoom in
Previous page
1/108
Next page

Getting Started Connections Settings Playback Remote ControlZONE2 Information Specifications
ENGLISH
GVideoH
Symptom Cause / Countermeasure Page
No sound is produced
from center speaker.
When playing monaural audio sources, select a surround mode
other than “STANDARD” (Dolby/DTS Surround).
67
No sound is produced
from surround
speakers.
Set the surround mode to a mode for surround playback. 67, 68
No sound is produced
from surround back
speaker.
Check that the surround back speaker’s power amplifier
assignment is set to “Normal”.
Set the surround back speakers to something other than
“None”.
Set “Surround Parameter” – “Surround Back” to something
other than “OFF”.
Set the surround mode to the surround playback mode.
33
33
70
67, 68
No sound is produced
from subwoofer.
Turn on the subwoofer’s power.
Set the subwoofer to “Yes”.
Check the subwoofer connections.
Increase the subwoofer’s channel level.
33
12
34
DTS sound is not
output.
Set the Blu-ray disc/DVD player’s audio output setting to “Bit-
stream”. For details, refer to the Blu-ray disc/DVD player’s
operating instructions.
Use a DTS-compatible Blu-ray disc player/DVD player.
Set the decode mode to “Auto” or “DTS”.
48
Dolby TrueHD, DTS-
HD, Dolby Digital Plus
audio is not output.
Make HDMI connections.
Set the Blu-ray disc/DVD player’s audio output setting to “Bit-
stream”. For details, refer to the Blu-ray disc/DVD player’s
operating instructions.
Use a DTS-compatible Blu-ray disc player.
13
Symptom Cause / Countermeasure Page
No picture appears. Check the connections of the AVR-990’s video output terminals
and the TV’s input terminals.
Make the proper input setting for the input terminals of the TV
connected to the AVR-990.
Cancel the PURE DIRECT mode.
High definition (1080i/720p) and progressive (480p/576p) video
signals are not down-converted. Set the player to interlace
(480i/576i) signals.
Check the “Video Select” setting.
13, 14
68
47
Picture cannot be
recorded.
The REC OUT video terminal does not have a video conversion
function, so use a video cable to input video signals, an S-Video
cable to input S-Video signals.
17
DVDs cannot be
copied on a VCR.
This is not a malfunction. Most movie software includes copy
prevention signals and cannot be copied.
GUI is not displayed. Set “Format” according to the format (NTSC or PAL) of the TV
being used.
41
GAudioH
GHDMIH
Symptom Cause / Countermeasure Page
HDMI audio signals
are not output from
speakers.
Set “Audio Out” to “AMP” to output HDMI audio signals from
the speakers.
35
No picture appears
with HDMI
connections.
Check the connection of the HDMI connectors.
Select the input source assigned to the HDMI terminal at “Input
Assign”.
Connect a monitor that is compatible with copyright protection
(HDCP).
Check that the output format (HDMI FORMAT) of the connected
player, etc., matches the TV’s compatible input formats.
13
26, 45
13
13, 14
No sound is output
from the monitor
connected with HDMI
connections.
Set “Audio Out” to ”TV” to output HDMI audio signals from the
TV.
35
When performing the
following operations
on a connected
device, AVR-990 has
the same operations.
Power ON/OFF
Switching audio
output devices
Adjust volume
Switch input source
Set “HDMI Control” to “OFF”. When you only want to operate the
power on/off each device, set “Power Off Control” to “OFF”.
35
GControl dock for iPodH
Symptom Cause / Countermeasure Page
iPod cannot be
played.
Connect to the terminal to which “iPod dock” was assigned and
switch the input source.
Check the iPod connections.
Plug the control dock for iPod’s AC adapter into a power outlet.
Communications with the AVR-990 are not possible unless the
AC adapter is plugged in.
23, 46
15
Troubleshooting
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-990 in the language / languages: English as an attachment in your email.

The manual is 17,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-990

Denon AVR-990 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info