584418
57
Zoom out
Zoom in
Previous page
1/108
Next page

Getting Started Connections Settings Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
The channel switches continuously when [TUNING] is pressed and
held.
The song title, artist name, composer name, category and reception
level can be checked by pressing <STATUS>.
The time (default : 30 sec) for which the GUI menu are displayed can
be set “GUI” “Tuner” (vpage 41). Press uio p to return to
the original screen.
1
Set [DEVICE SELECT 1] to “MAIN/TV” and [DEVICE
SELECT 2] to “MAIN”.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Use [TUNING] to select the channel.
When the channel is tuned in, the name of the song and artist
are displayed.
4
Adjust the items below.
Adjusting the master volume (vpage 65)
Selecting the surround mode (vpage 67)
Adjusting the Sound and Picture Quality
(vpage 69)
n
n
n
Listening to SIRIUS Satellite Radio
The strength of both the SIRIUS satellite and terrestrial signals can be
checked “Antenna Aiming” (vpage 50).
Checking the SIRIUS Signal Strength and Radio ID
1
Press <STATUS> until “SIGNAL” appears on the
display.
The display will switch as shown below, depending on the
reception conditions.
Display Status
EXCELLENT Signal strength is excellent
GOOD Signal strength is good
WEAK Signal strength is weak
NO SIGNAL No signal
2
Adjust the position of the antenna until “SIGNAL:
EXCELLENT” is shown on the display.
3
Press <STATUS> until the channel (example:
“SR001”) is displayed.
4
Press [TUNING] and select channel 0 (SR000).
Channel No. and Sirius ID are alternately shown on the display.
S R 0 0 0 S i r i u s I D
* * * * * * * * * * * *
Write your own SIRIUS ID for storage use.
Sirius ID :
b
Sirius ID
When operating SIRIUS with the AVR-990 via the remote control unit,
use [SAT TU].
Tuning in Radio Stations – SIRIUS Satellite Radio
Presetting Radio Channels (Preset Memory)
Your favorite broadcast channels can be preset so that you can tune
them in easily. Up to 56 channels can be preset.
To preset other channels, repeat steps 1 to 4.
NOTE
Preset channels are erased by overwriting them.
Listening to Preset Channels
You can also operate via the main unit. In this case, perform the
following operations.
Press <TUNING PRESET>, then turn <SOURCE SELECT> to select the
preset radio channel.
Press [CHANNEL] to select the desired preset channel,
then press ENTER.
1
Tune in the broadcast channel you want to preset.
2
Press [MEMORY].
3
Press [SHIFT] to select the block in which the channel
is to be preset, then press [CHANNEL] to select the
preset number.
4
Press [MEMORY] again to complete the setting.
Playback
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-990 in the language / languages: English as an attachment in your email.

The manual is 17,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-990

Denon AVR-990 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info