584416
72
Zoom out
Zoom in
Previous page
1/80
Next page
Symptom Cause Countermeasure Page
No sound is
produced from
center speaker.
You are playing a monaural
source (TV, AM radio broadcast,
etc.) in the STANDARD mode.
The mode is set to something
other than “STANDARD”.
36
No sound
is produced
from surround
speakers.
The surround mode is set to
“STEREO, “DIRECT” or “PURE
DIRECT”.
Set to a surround playback
mode.
37
No sound is
produced from
surround back
speaker.
The surround back speakers
power amplifier is assigned to a
different channel.
Surround back speaker setting is
set to “None.
Surround mode not set to a mode
for 6.1- or 7.1-channel playback.
Check the setting and change it
as necessary.
Set to something other than
“None.
Select a surround playback
mode.
31
26
37
No sound is
produced from
subwoofer.
Subwoofer’s power not turned
on.
The “Subwoofer” setting at
“Speaker configuration” is set to
“No.
The subwoofer is not properly
connected.
The subwoofers volume is
turned off.
Turn on the subwoofers power.
Set to “Yes”.
Check the connections.
Adjust the subwoofer’s volume
to an appropriate level.
26
9
50
No test tones are
produced when
remote control
unit’s TEST button
is pressed.
Surround mode not set to
“STANDARD”.
Set to the STANDARD mode. 36
DTS sound is not
output.
DVD player’s audio output setting
is not set to bitstream.
DVD player is not compatible
with DTS sound playback.
The AVR-988’s “Decode Mode
setting is set to “PCM”.
Set the DVD player. For details,
refer to the DVD player’s
operating instructions.
Use a DTS-compatible player.
Set to the Auto or “DTS”
mode.
34
HDMI audio
signals are not
output from
speakers.
The “Manual Setup” “HDMI
Setup” “HDMI Audio Setup”
“HDMI Audio Out” setting is
set to “TV”.
Set to “AMP”. 27
Symptom Cause Countermeasure Page
No sound is
output from
the monitor
connected
with HDMI
connections.
The “Manual Setup” “HDMI
Setup” “HDMI Audio Setup”
“HDMI Audio Out” setting is
set to AMP”.
Set to “TV”. 27
GAudioH
Symptom Cause Countermeasure Page
No picture
appears.
The connections between the
AVR-988 and monitor are faulty.
The monitors input setting is
wrong.
PURE DIRECT mode is set.
The player is connected using the
component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
connectors.
Check the connections.
Set properly.
Cancel the PURE DIRECT mode.
High definition (1080i/720p) and
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
11 ~ 20
37
No picture
appears
with HDMI
connections.
The connections to the HDMI
connectors are faulty.
HDMI input setting is improper.
The monitor is not compatible
with copyright protection
(HDCP).
The HDMI format of the player
and monitor do not match.
Check the connections.
Check the HDMI input setting.
Connect a monitor that is
compatible with copyright
protection (HDCP).
Match the HDMI format of the
player and monitor.
11
34
11
11
Picture cannot be
recorded.
Input source does not match
recorder’s video connection
connector (video or S-Video).
The video conversion function
does not work for the REC
OUT connectors. Match the
input source and recorder
connections.
15
DVDs cannot be
copied on a VCR.
This is not a malfunction. Most
movie software includes copy
prevention signals and cannot be
copied.
GVideoH

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
1.AVR988EU_101_4th.indd 72 2007/09/13 11:33:03
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-988 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-988 in the language / languages: English as an attachment in your email.

The manual is 10,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info