584416
61
Zoom out
Zoom in
Previous page
1/80
Next page
Multi-zone Operations
Turning the Power On and Off
GOperation on the main unitH
q Press <ZONE2 ON/OFF>.
w When the power turns on, the multi-zone indicator ( ) lights on
the display.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to AUDIO and [MODE SELECTOR 2] to
“ZONE2”.
w Press [ZONE2 ON] or [ZONE2 OFF].
Selecting the Input Source
GOperation on the main unitH
q Press <ZONE2 / REC SELECT>.
w Turn <SOURCE SELECT> and select the ZONE2’s input source.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to AUDIO and [MODE SELECTOR 2] to
“ZONE2”.
w Press [SOURCE SELECT].
Adjusting the Volume
GOperation on the main unitH
q Press <ZONE2 / REC SELECT>.
w Turn <VOLUME> to adjust.
GOperation on the remote control unitH
q Set [MODE SELECTOR 1] to AUDIO and [MODE SELECTOR 2] to
“ZONE2”.
w Press [VOLUME].
– – – –70dB ~ –40dB ~ +18dB[Variable range]
The volume can be adjusted when menu “Manual Setup” – “Zone2
Setup” “Volume Level” is set to “VAR”. The volume can be increased
up to the value set at menu “Manual Setup” “Zone2 Setup”
“Volume Limit” (vpage 30).
SOURCE SELECT
<ZONE2 ON/OFF>
VOLUME
<ZONE2/REC SELECT>
SOURCE
SELECT
VOLUME
[MUTING]
[MODE
SELECTOR 1]
[MODE
SELECTOR 2]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
Turning off the Sound Temporarily
q Set [MODE SELECTOR 1] to AUDIO and [MODE SELECTOR 2] to
“ZONE2”.
w Press [MUTING].
The sound is reduced to the level set at menu “Manual Setup”
“Zone2 Setup” – “Mute Level” (vpage 30).
To cancel, either adjust the volume or press [MUTING] again.
The setting is canceled when the zone’s power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2, playback is
only possible if the digital signal being input is in PCM (2-channel)
format.
Digital audio signals input from the HDMI connectors cannot be
played in multi-zone.
When certain digital signals are being input, noise may be output
from the ZONE2 audio output connectors.

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting
[MAIN OFF]
[ZONE2 ON]
SOURCE
SELECT
[ZONE2 OFF]
[MAIN ON]
When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing [MAIN ON] or [MAIN OFF].
1.AVR988EU_101_4th.indd 61 2007/09/13 11:32:53
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-988 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-988 in the language / languages: English as an attachment in your email.

The manual is 10,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info