94
System setup items and default values (set upon shipment from the factory)
2. Speaker Setup
3.Input Setup
Digital In
Assignment
This assigns the digital input jacks for the different input
sources.
Input
source
Digital
Inputs
CD DVD VDP
TV
DBS V. AUX VCR-1 VCR-2
COAX1 COAX2 OPT1 OFF OPT2 OPT5 OPT3 OFF
1
CDR/TAPE
OPT4
2
Ext. In
Subwoofer
Level
Set the Ext. In Subwoofer terminal playback level. Subwoofer = +15 dB
This assigns the color difference (component) video input jacks for
the different input sources.
Video Input
Mode
Set the input signal to be output from the monitor output terminal.
Component
In Assign
3
4
DVD VDP TV
DBS
VCR-1 VCR-2 V. AUX —
VIDEO1 NONE VIDEO2 VIDEO3 NONE NONE NONE —
—
—
AUTO
Input Setup Default settings
5
Auto Tuner
Presets
FM stations are received automatically and stored in the memory.
A1 ~ A8
B1 ~B8
C1 ~C8
D1 ~D8
E1 ~E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
F1 ~F8 90.1 MHz
G1 ~G8 90.1 MHz
1. Auto Setup/Room EQ
Auto Setup/Room EQ Default settings
1
2
Auto Setup
Room EQ
Setup
Power Amp
Assignment
This parameter is for optimizing the Room EQ with which the audio
signals are produced from the speakers.
3
Manual EQ
Setup
Direct Mode
Setup
5
Set the ON/OFF setting of Room EQ, in the case of the surround
mode is in Direct or Pure Direct.
4
Mic Input Select
Set this to switch the Mic Input jack for use for Mic or V.Aux L-
channel input jack.
Set this to switch the surround back channel’s
power amplifier for use for zone2.
Set the Room EQ setting with All or Assign for each surround mode.
SURROUND BACK
All Channel and Frequency=0dB
All
OFF
Mic
Speaker Setup Default settings
1
2
Speaker
Configuration
Channel
Level
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-
size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small SmallYes
Front L & R Center Surround L & RSubwoofer
12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m)12 ft (3.6 m)
Front L
Front R Center
Surround
R
Surround
Back R
Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
Surround Back Sp.
Small / 2spkrs
3
Delay Time
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
SBL & SBR
10 ft (3.0 m)
Surround
Back L
0 dB
Surround
L
0 dB
Crossover
Frequency
5
Set the frequency (Hz) below which the bass so of the various
speaker is to be output from the subwoofer.
4
80Hz
Subwoofer Mode
This selects the subwoofer speaker for playing deep bass signals. LFE
