584414
67
Zoom out
Zoom in
Previous page
1/100
Next page
67
[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)
1
Press the Power switch button.
3
With ZONE2 SOURCE displayed, turn
the FUNCTION knob and select the
source you wish to output.
The display switches the selected
source.
FUNCTION
4
Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
2 1
3, 5
ZONE2 SOURCE
FUNCTION
NOTES:
The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recording output
jacks.
Digital signals are not output from the ZONE2 audio output
jacks.
Refer to page 65, 66 about the MULTI ZONE connections.
(Main unit)
(Main unit)
2
Press the ZONE2/REC button.
The display switches as follows each
time the button is pressed.
ZONE 2 /
REC SELECT
(Main unit)
4
5
3
1
2
2
Press the ZONE2 ON button.
To turn off the ZONE2 mode, press
the ZONE2 OFF button.
(Remote control unit)
3
Press the input source button
The ZONE2 source switches directly.
4
The output level of the ZONE2 OUT
terminals can be controlled using the
VOLUME + and - buttons on the remote
control unit.
The output level of ZONE2 OUT can be
controlled only if ZONE2 vol. level is set
Variable at Zone2 Control in System
Setup Menu. (see page 43,44)
(Remote control unit)
DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
5
When the ZONE2 SOURCE function is
set to TUNER, the preset channel can be
selected using the CHANNEL + and -
buttons on the remote control unit.
(Remote control unit)
[2] Remote control unit operations during multi-source playback (selecting the input source)
1
Select ZONE2 using the ZONE2 button.
(Remote control unit)
This operation is not possible in the REC OUT mode.
This operation is possible when ZONE2 mode is selected.
RECOUT
ZONE2
To cancel, turn the function knob and
select SOURCE.
5
FUNCTION
(Main unit)
The main zone
output can be
turned on and off
with the MAIN
ON/OFF button.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-985S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-985S in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info