584411
57
Zoom out
Zoom in
Previous page
1/76
Next page

ENGLISH
Getting Started
Connections Playback Remote Control Information Troubleshooting
SpecificationsSettings
Playing 2-Channel Sound in ZONE2 (Multizone Function)
2-channel sound can be played in rooms other than the MAIN
ZONE where multichannel sound is played.
There are two methods to do this, as described below. Choose
one of the methods.
q ZONE2 playback by speaker output
wZONE2 playback by audio output (PRE OUT) (using an
external amplifier))
q ZONE2 Playback by Speaker
Output
Preparations
Connecting and setting the speakers
Connecting the speakersn
w q w q
(L) (R)
Necessary settings
Set the AMP ASSIGN mode to “ZONE2”.
Amp Assign” (vpage 27)
Perform the settings at “ZONE2 Setup”.
“Making the ZONE2 settings” (vpage 31)
n
w ZONE2 Playback by Audio
Output
Connection (ZONE2)
The audio signals connected to the AVR-890’s ZONE2 output terminals
(ZONE2 OUT) are output to the ZONE2’s amplifier and played with that
amplifier.
R
L
R
L
"69
*/
Adjust the volume on the connected amplifier.
Also be sure to read the operating instructions of the connected
devices.
1
Set the remote control unit’s
“device selector switches” as
shown on right.
2
Turn on the AVR-890’s power.
(vpage 19 Turning the Power On)
3
Press to turn on the ZONE2 power.
When the power turns on, the indicator lights on the
display.
b The power can be turned on by pressing the one of
while in the standby mode.
4
Use the input source selector to choose the input
source.
The selected input source is shown on the display.
NOTE
When “SOURCE” is selected for the input source, the sound being
played in the MAIN ZONE is played. No sound is output if a digital
audio input source is being played in the MAIN ZONE.
Adjusting the volume (for q ZONE2 playback by
speaker output”)
Use
to adjust the volume.
GVariable rangeH
– – –
–80dB(1)
~
–40dB(41)
~
+18dB(99)
b The volume can be adjusted up to the level set at “Vol. Limit”
(vpage 31).
b The volume display is the display set at “Volume Display”
(vpage 31).
AVR-890
The operation is the same for q ZONE2 playback by speaker
output” and “w ZONE2 playback by audio output”.
Playback
MAIN ZONE
ZONE2
Rear
For w ZONE2 playback by audio output”, adjust the volume on the
connected amplifier.
NOTE
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
It is not possible to play the digital audio signals input from the
HDMI, COAXIAL or OPTICAL terminals in ZONE2. Play using analog
connections (in stereo).
With the Amp Assign function, Zone 2 audio signals are output from
the AVR-890's SURR BACK/AMP ASSIGN terminals.
Multi-Zone
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-890 in the language / languages: English as an attachment in your email.

The manual is 14,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-890

Denon AVR-890 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info