584401
44
Zoom out
Zoom in
Previous page
1/72
Next page

ENGLISH
Getting Started Connections Remote Control Information Troubleshooting SpecificationsMulti-ZoneSettings
1
Press to select “SIRIUS”.
2
Press on the main unit until “SIGNAL” appears
on the display.
The display will switch as shown below,
depending on the reception conditions.
Display Status
EXCELLENT Signal strength is excellent
GOOD Signal strength is good
WEAK Signal strength is weak
NO SIGNAL No signal
3
Adjust the position of the antenna until “SIGNAL:
EXCELLENT” is shown on the display.
4
Press on the main unit until the channel you
want to check (example: “SR001”) is displayed.
5
Press and select channel 0 (SR000).
Channel No. and Sirius ID are alternately
shown on the display.
S R 0 0 0 S ir i u s I D
* * * * * * * ** * * *
b Write your own SIRIUS ID for storage use.
Sirius ID :
The channel switches continuously when
is pressed and held.
The song title, artist name, composer name,
category and reception level can be checked
by pressing on the main unit.
The time (default : 30 sec) for which the on-
screen display are displayed can be set at
menu On-Screen Display” (vpage 31).
Press uio p to return to the original
screen.
Front
The strength of both the SIRIUS and terrestrial signals can be checked
at menu Antenna Aiming” (vpage 37).
Playing Components
Checking the SIRIUS Signal Strength and Radio ID
Front
1
Press to select the memory block (A to G).
2
Press to select the desired preset channel (1
to 8).
1
Tune in the broadcast channel you want to preset.
2
Press .
3
Press to select the block (A
to G) in which the channel is to be
preset.
4
Press to select the preset number (1 to 8).
5
Press again to complete the setting.
To preset other channels, repeat steps 1 to 5.
NOTE
Preset channels are erased by overwriting them.
Presetting Radio Channels (Preset Memory)
Your favorite broadcast channels can be preset so that you can tune
them in easily. Up to 56 channels can be preset.
Listening to Preset Channels
You can also operate via the main unit. In this case, perform the
following operations.
Press , then turn on the main
unit to select the preset radio channel.
Front
1
Press o p.
C A T : Po p s
2
Use o p to select the category,
then use ui to select the desired
channel.
Channel category
“UPDATING” is displayed while the encoding code is being
updated.
“SIRIUS UPDATING” is displayed when updating SIRIUS tuner
firmware.
Refer to “Troubleshooting” “SIRIUS Satellite Radio” regarding other
messages (vpage 64).
Searching Categories
Front
Playback
Sirius ID
Front
1
Tune to the channel you want to lock.
2
Press for at least 3 seconds.
“Code: [ ]” is displayed.
3
Enter the 4-digit lock code using
uio p.
When you enter the correct code, the corresponding channel is
locked.
4
Press .
Channels under Parental Lock cannot be tuned in by performing
Tuning Up/Down or by category search.
Channels stored in preset memory can be tuned in by the preset
channel select operation, even if Parental Lock is applied.
When a channel to which Parental Lock is applied is being played,
Parental Lock for that channel is cancelled by performing Step2.
See “Edit Lock Code (vpage 37) for the method of changing
Parental Lock Code.
You can also set “Parental Lock” from the menu (vpage 37).
Parental Lock
Front
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-790 in the language / languages: English as an attachment in your email.

The manual is 13,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-790

Denon AVR-790 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info