584397
39
Zoom out
Zoom in
Previous page
1/68
Next page
36
ENGLISH
ENGLISH
Advanced Operation Advanced Operation
Remote control unit operations during
multi-source playback (selecting the source)
1Set the MODE 1 switch to the “AUDIO”.
2Set the MODE 2 switch to the “ZONE2”.
3Press the ZONE2 ON button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
4Press the FUNCTION button.
The ZONE2 source switches directly.
5The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
VOLUME button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
dB (MINIMUM)
6When the ZONE2 SOURCE function is set to
TUNER, the preset channel can be selected
using the CHANNEL button on the remote
control unit.
This is only possible when the main unit in the ZONE2 mode
( page 43).
Outputting a program source to amplifier,
etc., in a different room (ZONE2 mode)
1Press the ZONE2/REC SELECT button to display
the “ZONE2 SOURCE” on the display.
The display switches as follows each time the button is
pressed.
2Turn the FUNCTION knob to select the source
you want to output appears on the display.
3Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
To cancel, turn the FUNCTION knob and select SOURCE.
RECZONE2
4Press the ZONE2 button. Lights
The signals of the source selected in the ZONE2 mode are also
output from the VCR and CDR/TAPE recording output terminals.
Digital signals are not output to the ZONE2 output terminals.
ZONE2
FUNCTION ZONE2/REC SELECT
MODE 2
MODE 1
ZONE2 ON
ZONE2 OFF
FUNCTION
VOLUME
CHANNEL
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-786S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-786S in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info