584387
13
Zoom out
Zoom in
Previous page
1/192
Next page
13
Connecting video components equipped with Component Video (color difference) video jacks
(Component - Y, Pb, Pr ; Y, Cb, Cr)
When making connections, also refer to the operating instructions of the other components.
The signals input to the component (color difference) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.
Some video sources with component video outputs are labeled Y, PB, PR, or Y, CB, CR, or Y, B-Y, R-Y. These terms all refer to component video
color difference output.
The function assigned to the component video input can be changed at the system setup. For details, see “Setting the Component In Assign”.
(See pages 71, 72)
YPBPR
VIDEO IN
COMPONENT
YPBPR
VIDEO OUT
COMPONENT
DVD player Monitor TV
Connecting a DVD player
Connecting a monitor TV
DVD IN jacks
Connect the DVD player’s component (color difference) video output jacks
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75
/ ohms coaxial video pin-plug cords.
In the same way, another video source with component video outputs such
as a DTV/DBS tuner, etc., can be connected to the TV/DBS component
(color difference) video jacks.
MONITOR OUT jack
Connect the TV’s component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the
COMPONENT MONITOR OUT-2 jack using 75 /ohms coaxial video pin-plug cords.
Connect the TV’s component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the
COMPONENT MONITOR OUT-1 jack using BNC connectors.
The COMPONENT MONITOR OUT-1 and the COMPONENT MONITOR OUT-2 can be used simultaneously.
The component video input and/or output jacks may be labeled differently
on some TVs, monitors or video components (Y, Pb, Pr; Y, Cb, Cr; Y, B-Y, R-
Y). Check the owner’s manuals for other components for further
information.
(MONITOR OUT / ZONE2)
(MONITOR OUT / ZONE2)
(MONITOR OUT / ZONE2)
The Video Conversion Function
The AVR-5805 is equipped with a function for up and down converting video signals.
Because of this, the AVR-5805’s MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higher
quality connection, regardless of how the player and the AVR-5805’s video input jacks are connected.
Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections
using the S-Video jacks, then connections using the regular video jacks (yellow).
This unit’s input jacks This unit’s output jacks
The flow of the video signals.
(Component Video Jacks)
(S-Video jack)
(Video jack)
(Component Video Jacks)
(S-Video jack)
(Video jack)
Cautions on the Zone2 video conversion function:
There is no TBC (Time Base Collector) for Zone2.
When the component video terminals are used to connect
the AVR-5805 with a TV (or monitor, projector, etc.) and the
video (yellow) or S video terminals are used to connect the
AVR-5805 with a VCR, depending on the combination of the
TV and VCR the picture may flicker in the horizontal
direction, be distorted, be out of sync or not display at all
when playing video tapes.
If this happens, connect a commercially available video
stabilizer, etc., with a TBC (time base corrector) function
between the AVR-5805 and the VCR, or if your VCR has a
TBC function, turn it on.
( : only 480i/580i )
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-5805MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-5805MK2 in the language / languages: English as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info