584386
26
Zoom out
Zoom in
Previous page
1/214
Next page
MeasuresCauseScreen example
26
Easy Setup and Operation
About the error message
These error messages will be displayed when performing the measurements of Auto Setup and the automatic measurements
can not be completed because of the speaker arrangement, measurement environment, or other factors. Please check the
following matters, reset the pertinent items, and measure again. Be sure to turn off the AVR-5805CI’s power before checking
the speaker connections.
qThe speakers required for producing suitable
reproduction have not been detected.
The front L speaker was detected, but the
front R speaker was not detected.
Only one channel of the surround (A) and
surround (B) speakers was detected.
Sound was output from the R channel when
only one surround back speaker was
connected.
The surround back or the surround (B) speaker
was detected, but the surround (A) speaker
was not detected.
If multiple errors occur, press the CURSOR FFor
GGbutton to check the contents.
Check that the pertinent speakers
are properly connected.
wThe speaker polarity is connected in reverse.
If multiple errors occur, press the CURSOR FFor
GGbutton to check the contents.
Check the polarity of the pertinent
speakers.
For some speakers, the screen
below may be displayed even though
the speakers are properly connected.
If so, select “Skip
0
”.
eThere is too much ambient noise in the room
and the measurements cannot be made
accurately.
rThe sound level that is output from the
speakers and/or subwoofer is too low.
Either turn off the power of the
device that generated the noise
during the measurements or move
the device away.
•Try again at a time when it is quieter.
Check the placement and orientation
of the loudspeakers.
Adjust the subwoofer’s output level.
tThe measurement microphone is not
connected, or all of speakers have not been
detected.
yThe front L speaker was not detected.
Connect the measurement microphone
to the SETUP MIC jack.
Check the speaker connection.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-5805CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-5805CI in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info