584386

Denon AVR-5805CI Manual

23
Zoom out
Zoom in
Previous page
1/214
Next page
23
Easy Setup and Operation
4If the check ends, press the ENTER button
again.
[ Second screen ]
3Check the results of the speaker detection,
then press the ENTER button.
•Switch to the second screen.
The screen shown at the below appears once the
preliminary measurements are completed.
Preliminary measurements
•This procedure is used to automatically determine the
background noise, whether or not speakers are connected,
and the polarities of the connected speakers.
•To avoid affecting the measurements, turn off the air-
conditioner or any other device that makes noise and take
the measurements with the room as quiet as possible.
1Press the CURSOR DDor HHbutton to select
“Start”, then press the CURSOR FFbutton.
•Start the preliminary measurements.
2Press the ENTER button.
•Switch to the “Speaker Detect Check” screen.
[ First screen ]
3
4
Once the settings are completed, press the
ENTER button at the each setting screen.
•The “Extra Setup” screen reappears.
Press the CURSOR DDor HHbutton to select
“Exit”, then press the ENTER button.
•Return to the “Auto Setup” screen.
1
2
Press the CURSOR DDor HHbutton to select
“Extra Setup”, then press the CURSOR FF
button.
•Switch to the “Extra Setup” screen.
Extra Setup
•The AVR-5805CI has ten available amplifier channels, some
of which can be assigned for powering speakers in ZONE2,
ZONE3 and ZONE4 depending on the speaker system
complement in the main room. If this functionality is not
needed, skip this “Extra Setup” procedure and proceed to
“Preliminary Measurements”.
•By default, the speaker system setting is set to 9.1 channels.
Press the CURSOR DDor HHbutton to choose the
setting you want to change, then press the
ENTER button.
•Switch to the setting screen.
For instructions on making the “Channel Setup”
settings ( page 126 ~128).
For instructions on making the “Power Amp Assign”
settings ( page 129 ~ 133).
The speakers measured with this Auto Setup
procedure are based on the setting of these “Channel
Setup” and “Power Amp Assign” functions.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-5805CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-5805CI in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info