17
• System setup items and default values (set upon shipment from the factory)
System setup Default settings
q
!5
e
t
y
!3
!4
Speaker
Configuration
(Surround
Speaker
Setting)
Crossover
Frequency
Setup Lock
Channel
Level
Subwoofer
Peak Limit
Lev
Digital In
Assignment
On Screen
Display
Auto Tuner
Presets
Input the combination of speakers in your system and their
corresponding sizes (Small for regular speakers, Large for full-size,
full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
combinations of surround speakers to be used for the
different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
Set the frequency (Hz) below which the bass sound of the various
speakers is to be output from the subwoofer.
Set whether or not to lock the system setup settings so that they
cannot be changed.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
This parameter is for detecting the maximum level of the low bass
signals output from the subwoofer channel in order to protect the
subwoofer from damage and prevent unpleasant distorted sounds
from being produced.
This assigns the digital input jacks for the different input
sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated (from MONITOR 1 outputs
only).
FM stations are received automatically and stored in the memory.
Surround
mode
Surround
speaker
Input
source
Digital
Inputs
Front Sp.
Small
Center Sp. Surround Sp.Sub Woofer
Small SmallYes
DOLBY/
DTS
SURROUND
THX
THX 5.1
WIDE
SCREEN
5CH/7CH
STEREO
DSP
SIMULATION
MULTI CH
DIRECT
——
A A AAAA——
FIXED —THX—
Front L & R Center Surround L & RSub Woofer
12.0 ft (3.60 m) 12.0 ft (3.60 m) 10.0 ft (3.00 m)12.0 ft (3.60 m)
Front L
Front R Center
Surround
R
Surround
Back R
Subwoofer
0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB
Peak Limiter = OFF
CD DVD VDP TV
DBS/SAT
VCR-1 VCR-2
TAPE-2
COAXIAL
1
COAXIAL
2
COAXIAL
3
OPTICAL
1
OPTICAL
2
OPTICAL
3
OPTICAL
4
OPTICAL
6
On Screen Display = ON
A1 ~ A8
B1 ~B8
C1 ~C8
D1 ~D8
E1 ~E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Surround Back Sp.
Small / 2spkrs
Setup Lock = OFF
w
Delay Time
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
SBL & SBR
10.0 ft (3.00 m)
o
Multi Zone
Control
This sets the output level for the multi-zone 1
output jacks.
Variable
Surround
Back L
0.0 dB
Surround
L
0.0 dB
Multi Zone1
vol. Level
Power AMP
Assignment
Set this to switch the surround back channel’s
power amplifier for use for multi-zone 2.
Surround Back
TAPE-1
OPTICAL
5
VCR-3
COAXIAL
4
V. AUX
COAXIAL
5
Subwoofer mode
This selects the subwoofer speaker for playing deep bass signals. LFE —THX—
r
THX Audio
Setup
When using a THX Ultra2 compatible subwoofer,
set the subwoofer’s frequency response.
THX Ultra2 Subwoofer = NO
Boundary Gain
compensation
Surround Back
Speaker Position
When using two surround back speakers, set
the distance of the two speakers.
The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0.3 m)
u
Video Input
Mode
Set the input signal to be output from the monitor output terminal.
AUTO
i
Audio Delay Adjust the time delay of the video and audio signals. Audio Delay = 0 ms
!0
Auto Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
!1
Ext. In Setup Set the Ext.In terminal playback method. MODE = DSP, S.Back = NOT USED, SW Level = +15 dB, INPUT Vol. = 0 dB
!2
Digital Multi
Ch In
Digital multichannel input setting.
DENON Link = OFF, Digital Ext. In = OFF
