Connecting video components
• To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can result in a drop in sound quality.
• When making connections, also refer to the operating instructions of the other components.
Connecting a TV/DBS tuner
TV/DBS
• Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the (yellow) TV/DBS IN jack using a
75 Ω/ohms video coaxial pin plug cord.
• Connect the TV’s or DBS tuner’s audio output jacks (AUDIO OUTPUT) to the TV/DBS IN jacks using pin
plug cords.
AUDIO
VIDEO
TV or DBS tuner
LD player, CDV player, etc.
Video deck 1
Video deck 2
Monitor TV
MONITOR OUT
• Connect the TV’s video input
jack (VIDEO INPUT) to the
MONITOR OUT jack
using a 75 Ω/ohms video
coaxial pin plug cord.
• The monitor TV can also be
connected in the same way
to the VIDEO MONITOR
OUT-2 jack. Note, however,
that the AVR-5700’s on-
screen display signals are
not output from this jack.
(See page 26.)
VIDEO
NOTES:
Video output connections for LD players equipped with AC-3RF output jacks.
• To connect an Dolby Digital AC-3 compatible LD player to the AC-3RF jacks,
connect the player’s video outputs to this unit’s VDP/DVD input jacks.
• When the AC-3RF-input selector button on the AVR-5700 is pressed, the picture
switches to the signals input to the VDP/DVD input jacks.
Connecting a video disc player VDP
VDP
• Connect the video disc player’s video output jack (VIDEO OUTPUT) to the
(yellow) VDP/DVD IN jack using a 75 Ω/ohms video coaxial pin plug
cord.
• Connect the video disc player’s analog audio output jacks (ANALOG AUDIO
OUTPUT) to the VDP/DVD IN jacks using pin plug cords.
• A DVD player can be connected to the DVD jacks in the same way.
• It is also possible to connect a video disc player, DVD player, video camcorder,
game machine, etc., to the V.AUX jacks.
AUDIO
VIDEO
Connecting a video decks
• There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck’s video output jack (VIDEO OUT) to the (yellow) VCR-1 IN jack, and the video deck’s video input jack (VIDEO IN) to the
(yellow) VCR-1 OUT jack using 75 Ω/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck’s audio output jacks (AUDIO OUT) to the VCR-1 IN jacks, and the video deck’s audio input jacks (AUDIO IN) to the VCR-1
OUT jacks using pin plug cords.
2Connect the second video deck to the VCR-2 jacks in the same way.
AUDIOAUDIO
VIDEOVIDEO
Note on connecting the digital input jacks
•Only audio signals are input to the digital input
jacks. For details, see page 6.
LD player or other component
equipped with digital output jacks
LD player or other component equipped
with a Dolby Digital RF output jack