498717
27
Zoom out
Zoom in
Previous page
1/96
Next page
27
ENGLISH
Dolby Virtual Speaker mode
The Dolby Virtual Speaker mode is a mode using 3D sound technology from Dolby Laboratories to achieve
multi-channel surround sound using only two speakers for the front channels.
With two speakers for the front channels, one of two modes can be selected: Reference or Wide.
The Dolby Virtual Speaker mode can be used not only with Dolby Digital and DTS multi-channel sources but
also with 2-channel sources. With 2-channel sources, one of two 2-channel modes can be selected: Virtual 1
(Dolby Pro Logic
II Cinema) and Virtual 2 (Dolby Pro Logic).
With a multi-channel speaker configuration (for example 5.1 channels), the Dolby Virtual Speaker mode
provides different effects according to the speaker configuration.
[1] Playing Dolby Digital and DTS surround sound (with digital inputs only)
B Applicable sources
Digital input
Dolby Digital multi-channel sources
DTS sources
1, 2
2
5
1
1
2
4
5
w Set the input mode to AUTO, PCM or
DTS.
2
Set the surround mode to DOLBY VIRTUAL
SPEAKER.
D O L B Y VS
3
Play a program source including the or
mark.
The Dolby Digital indicator
lights when playing Dolby
Digital sources.
The DTS indicator lights
when playing DTS
sources.
This switches automatically according to the
format of the playback source.
4
Display the surround parameters for that
source.
(Remote control unit)
Light
Light
(Remote control unit)
SURROUND MODE
FUNCTION / SELECT
(Main unit)
(Remote control unit)
(Main unit)
Display
Surround parameters e
DOLBY VS (Dolby Virtual Speaker mode):
REF (Reference mode)
This is the standard mode.
WIDE (Wide mode)
This mode expands the front channel sound field.
D.COMP. (Dynamic range compression):
This parameter adjusts the dynamic range of the
Dolby Digital sound. When listening with the
volume turned relatively low, at night for
example, set this to the HI side to lower the
peak of the sound and amplify the quieter
sounds, narrowing the dynamic range and
making the sound easier to listen to. Set to
OFF to turn this function off.
LFE (Low Frequency Effect):
Program source and adjustment range
1. Dolby Digital : 10 dB to 0 dB
2. DTS Surround : 10 dB to 0 dB
When Dolby Digital encoded software is played,
it is recommended that the LFE LEVEL be set to
0 dB for correct Dolby Digital playback.
When DTS encoded movie software is played, it
is recommended that the LFE LEVEL be set to 0
dB for correct DTS playback.
When DTS encoded music software is played, it
is recommended that the LFE LEVEL be set to
10 dB for correct DTS playback.
5
Select and set the surround parameters.
If nothing is done for 6 seconds from when
the parameter is displayed, the normal
display reappears.
B Setting the DOLBY VS mode
V S Wide
The selected mode flashes.
The mode is not displayed if it cannot be
selected.
B D.COMP. setting
B Setting the LFE level
The LFE level can be adjusted in steps of 1
dB between -10 dB and 0 dB.
B DEFAULT setting
When YES is selected, the settings are
restored to the factory defaults.
When the surround parameters are displayed, use
the
and ª cursor buttons on the remote control
unit to switch to previous or following items.
Once the surround parameters have been set, stop
operating the buttons. After several seconds, the
normal display reappears and the settings are
automatically entered.
Wide
Narrow
OFF LOW MID HI
Dynamic range
OFF LOW MID HI
,/
,/
-10 -5 0
... ...
YES
,
D . C O M P. OFF
LFE
0
Bd
DEFAULYES <
(Remote control unit)
Playback with a digital input
1
Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
Example: DVD
FUNCTION / SELECT
(Main unit) (Remote control unit)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info