498717
8
Zoom out
Zoom in
Previous page
1/96
Next page
8
ENGLISH
Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
75 /ohms
COAXIAL
CABLE
FM ANTENNA
FM INDOOR
ANTENNA
(An accessory)
AM LOOP
ANTENNA
(An Accessory)
AM OUTDOOR
ANTENNA
GROUND
1
4
2
3
AM loop antenna assembly
Connect to the AM
antenna terminals.
Remove the vinyl tie
and take out the
connection line.
Bend in the reverse
direction.
a. With the
antenna on top
any stable
surface.
b. With the antenna
attached to a
wall.
Mount
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the
conductor.
3. Return the
lever.
NOTES:
Do not connect two FM antennas simultaneously.
Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
Make sure AM loop antenna lead terminals do
not touch metal parts of the panel.
Connecting a Video Component Equipped with Color Difference (Component -
Y, P
R/CR, PB/CB) Video Jacks (DVD Player)
When making connections, also refer to the operating instructions of the other components.
The signals input to the color difference (component) video jacks are not output from the VIDEO output jack
(yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video
input jacks are not output to the color difference (component) video jacks.
Some video sources with component video outputs are labeled Y, C
B, CR, or Y, Pb, Pr, or Y, R-Y, B-Y. These
terms all refer to component video color difference output.
At SYSTEM SETUP, the component video input terminal can be assigned for the input sources to which you
want to connect AV devices. (For details, see page 15.)
VIDE
O
OUT
COMPONENT
COMPONENT
VIDEO IN
Y
CRCB
COMPONENT
DVD player
Connecting a DVD player
DVD IN jacks
Connect the DVD players color difference (component) video output jacks
(COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using
75 /ohms coaxial video pin-plug cords.
In the same way, another video source with component video outputs
such as a TV/DBS tuner, etc., can be connected to the TV/DBS color
difference (component) video jacks.
Monitor TV
Connecting a monitor TV
MONITOR OUT jack
Connect the TVs color difference (component) video input jacks
(COMPONENT VIDEO INPUT) to the COMPONENT MONITOR
OUT jack using 75 /ohms coaxial video pin-plug cords.
The color difference input jacks may be indicated differently on
some TVs, monitors or video components (C
R, CB and Y, R-Y,
B-Y and Y, Pr, Pb and Y, etc.). For details, carefully read the
operating instructions included with the TV or other component.
Video Conversion signals
Signal input to the AVR-550SD
Video signal output to VIDEO
MONITOR OUT jack (yellow)
Video signal output to S-Video
MONITOR OUT jack
Video signal output to color
difference (component) Video
MONITOR OUT jack
Monitor Output jacks
Video signal input jack
C
C
(Up-conversion)
E
S-Video signal input jack
C
(Down-conversion)
CE
Color difference (component)
Video signal input jack
EEC
(
C
: Video signal output,
E
: Video signal not output)
FM ANTENNA
ADAPTER
FEEDER
CABLE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info