584381
15
Zoom out
Zoom in
Previous page
1/53
Next page
System Setup
ENGLISH
ENGLISH
12
Use System Setup to customize a variety of settings to suit your listening environment.
For the contents of a system menu and the initial setting of this unit ( page 17).
You can change the settings using the buttons on the remote control unit.
The AVR-486 is equipped with an alpha numeric front panel display that can also be used to check and adjust settings. Some
representative front display examples are shown below.
CURSOR
MODE 1
SETUP
ENTER
Front display
System Setup
No.
*TEST TONE Yes<
Press the CURSOR
FF
button to execute.
Currently selected line
*COAX1 CD
Current settingCurrently selected line
1
Set the MODE 1 switch to “AUDIO”.
2
Press the SETUP button to enter the setting.
4
Press the ENTER or CURSOR
HH
button to confirm
the new settings.
*System Setup
3
Press the ENTER or CURSOR
HH
button to select
the setting, then press the CURSOR
FF
or
GG
button to select the parameter.
*Front Large
Large Small
*Center Small
Large Small None
5
Press the SETUP button to finish system set up.
[ Display ]
Setting the Speaker Configuration
1
Press the CURSOR
FF
or
GG
button to select your
front speaker type, then press the ENTER or
CURSOR
HH
button to switch to the center speaker
setting.
*Front Large
Large Small
2
Press the CURSOR
FF
or
GG
button to select your
center speaker type, then press the ENTER or
CURSOR
HH
button to switch to the surround
speaker setting.
*Center Small
Large Small None
When Small has been selected for the front speakers,
Large cannot be selected for the center speaker.
3
Press the CURSOR
FF
or
GG
button to select your
surround speaker type, then press the ENTER or
CURSOR
HH
button to switch to the surround
back speaker setting.
*Surr. Small
Large Small None
When Small has been selected for the front speakers,
Large cannot be selected for the surround speakers.
The composition of the signals output to each channel and the
frequency response are adjusted automatically according to the
combination of speakers actually being used.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-486S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-486S in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info