8582
134
Zoom out
Zoom in
Previous page
1/154
Next page
134
Additional Information
Set the front speakers, center speaker and subwoofer in
the same positions as in example (1).
It is best to place the surround speakers directly at the side
or slightly to the front of the viewing position, and 60 to 90
cm above the ears.
Same as surround back speaker installation method (1).
Connect the surround speakers to the surround speaker A
terminals on the AVR-4806 and set settings on the setup
menu to “A”. (This is the factory default setting ( page
126).)
The signals from the surround channels reflect off the
walls as shown on the diagram at the left, creating an
enveloping and realistic surround sound presentation.
For multi-channel music sources however, the use of
bipolar or dipolar speakers mounted at the sides of the
listening position may not be satisfactory in order to create
a coherent 360 degree surround sound field. Connect
another pair of direct radiating speakers as described in
example (3) and place them at the rear corners of the room
facing towards the prime listening position.
eWhen using different surround speakers for
movies and music
To achieve more effective surround sound for both movies
and music, use different sets of surround speakers and
different surround modes for the two types of sources.
Subwoofer
Surround back speakers
Front speakers
45 ~ 60°
Monitor
Center speaker
[ As seen from above ]
Surround
speakers A
Surround
speakers A
Front speaker
60 to 90 cm
[ As seen from the side ]
Surround back
speaker Point slightly
downwards
140°
Surround speakers B
Surround speakers B
Set the front speakers slightly wider apart than the setup
for watching movies only and point them toward the
listening position in order assure clear positioning of the
sound.
Set the center speaker in the same positions as in example
(1).
Set surround speakers A for watching movies in the
positions described in example (1) or (2), depending on the
types of speakers used.
Set surround speakers B for playing multi-channel music at
the same height as the front speakers and slightly at an
angle to the rear of the listening position, and point them
toward the listening position.
Connect the surround speakers for watching movies to the
surround speaker A terminals on the AVR-4806, the
surround speakers for playing multi-channel music to the
surround speaker B terminals. Set the surround speaker
selection on the setup menu. (For instructions ( page
119, 120).)
•To activate the appropriate speakers for movies and music,
we suggest that during setup, choose Dolby Digital/DTS
with THX and Surround Speakers A (the bipolar or dipolar
speakers mounted at the sides of the listening position).
Choose Dolby Digital/DTS without THX and Surround
Speakers B (the direct radiating speakers mounted at the
rear corners of the listening room). Then, by simply
activating the THX function (used during movie playback,
the Surround A speakers are automatically activated. For
multi-channel music listening (Dolby Digital or DTS music
programs), turn off the THX enhancements by touching
the THX button on the remote control, and the Surround B
speakers will be automatically activated.
Example: Movie sources (Dolby, DTS surround, etc.)
“THX” or “THX 5.1” mode Speakers A
Music sources (DVD video, DTS CD, etc.)
“Dolby/DTS surround” Speakers B
The speakers can be switched at the touch of a button
by turning HOME THX CINEMA on when playing
movies and off when playing multi-channel music.
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-4806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-4806 in the language / languages: English as an attachment in your email.

The manual is 11,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-4806

Denon AVR-4806 User Manual - English - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info