125
Advanced Setup – Part 2
4Press the CURSOR DDor HHbutton to select the
Equalizer curve, then press the ENTER button.
•Display the “EQ Check” screen.
The display is only an approximate picture of the
response and that correction is happening at all
frequencies.
5Press the CURSOR FFor GGbutton to select the
speaker channel.
6If the check ends, pressing the CURSOR DDor HH
button to select the “Exit”, then press the
ENTER button.
•The “EQ Parameter Check” screen reappears.
9Press the CURSOR DDor HHbutton to select the
“Exit”, then press the ENTER button.
•The “Auto Setup / Room EQ” menu reappears.
10
Press the CURSOR DDor HHbutton to select the
“Exit”, then press the ENTER button.
•The “System Setup Menu” reappears.
7Press the CURSOR DDor HHbutton to select the
“Exit”, then press the ENTER button.
•The “Parameter Check” screen reappears.
The results of the “Auto Setup” procedure can
be reset even if the settings have been changed
after performing the “Auto Setup” procedure:
Press the CURSOR DDor HHbutton to select the
“Restore Yes
0
”, then press the CURSOR FF
button.
8
