98
Advanced Setup – Part 1
•Down-converting from the component video signal to the S-
Video and composite video signal is possible only when the
resolution of a component video signal is 480i / 576i.
•For optimum video performance, THX recommends that
video pass through (bypass) is used.
•When a non-standard video signal from a game machine or
some other source is input, the video conversion function
might not operate. If this happens, please set the conversion
mode to OFF.
•When the video conversion function has been used,
information such as that of text broadcasts which has been
added to the video signal might not be output. If this
happens, please set the conversion mode to OFF.
OFF:
The convert function does not operate.
The video signal input from the video input terminal
is only output to the video monitor out terminal.
The S-Video signal input from the S-Video input
terminal is only output to the S-Video monitor out
terminal.
The component input signal input from the
component input terminals is only output to the
component monitor output terminals.
Video:
The signal connected to the composite video
terminal is always played.
The composite video input signal is up-converted
and output from the S-Video and component
monitor output terminals.
3Press the ENTER button to enter the setting.
•The “Video Setup” menu reappears.
2Press the CURSOR DDor HHbutton to select the
setting, then press the CURSOR FFor GGbutton
to select the parameter.
Analog to HDMI Convert:
•ON:
Setting for converting analog video signals into
HDMI signals.
•OFF:
Setting for not converting analog video signals into
HDMI signals.
Color Space:
•Y Cb Cr:
The Y Cb Cr format video signals is output via the
HDMI output connector.
•RGB:
The RGB format video signals is output via the
HDMI output connector.
RGB Mode Setup:
•Normal:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 16
(black) to 235 (white).
•Enhanced:
Signals are output via the HDMI output connector
with a digital RGB video range (data range) of 0
(black) to 255 (white).
Setting the HDMI Out Setup
•Set whether to use the analog video signals to HDMI
conversion function.
•When using this conversion function, set the color format
and video range of the signals output from the HDMI terminal.
1Press the CURSOR DDor HHbutton to select the
“HDMI Out Setup” at the “Video Setup”
menu, then press the ENTER button.
•Display the “HDMI Out Setup” screen.
When the HDMI and the DVI-D connectors are
connected, the black may seem to stand out,
depending on the TV or the monitor. In this case, set
this to “Enhanced”.
When “Y Cb Cr” is selected under “Color Space”,
“RGB Mode Setup” will have no effect.
3Press the ENTER button to enter the setting.
•The “Video Setup” menu reappears.
