8582
85
Zoom out
Zoom in
Previous page
1/154
Next page
85
Advanced Operation
Multi-source recording / playback
1Press the ZONE3/REC SELECT button until
“RECOUT SOURCE” appears on the display.
The “REC” indicator lights.
2Turn the FUNCTION knob to select the source
you wish to record.
3Set the recording mode.
For operating instructions, refer to the manual of the
component on which you want to record.
RECOUT SOURCE
DVD
2Playing one source while recording another
(REC OUT mode)
2Recording Dolby Digital and DTS multichannel
sources
•With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog
signals.
The recording signals are output to the TAPE and VCR
output terminals.
Down-mixed analog signals converted into digital signals
are output from the OPTICAL 2, 3 and 4 digital output
terminals at this time.
1Press the ZONE3/REC SELECT button until
“RECOUT SOURCE” appears on the display.
2Press the INPUT MODE button to set the input
mode according to the source to be played.
3Press the DIRECT/STEREO button to set the
surround mode.
The multichannel digital signals are down-mixed and
output to the TAPE and VCR output terminals.
4Set the recording mode.
•To cancel, turn the FUNCTION knob and select “SOURCE”.
Recording sources other than digital inputs selected in the
REC OUT mode are also output to the ZONE3 audio/video
output terminals.
When the REC OUT mode is selected, the ZONE3 button on
the remote control unit cannot be operated.
When “ZONE2 SELECT” is selected at “Digital Out Assign”,
the source switches in association with the “ZONE2
SELECT” mode for the OPTICAL2 OUT connector (
page 111). 1The Dolby Headphone play mode is set when
headphones are connected to the PHONES jack
during playback in the DOLBY/DTS surround
mode.
When this is done, signals encoded in the Dolby
Headphone mode are automatically output from the
recording output terminals (analog and digital) and
can be recorded.
2Select the parameters and set the desired
mode.
Start recording.
Refer to the “Dolby Headphone” ( page 58).
NOTE:
Do not disconnect the headphones during recording.
2Dolby Headphone recording
When REC OUT mode is set to “SOURCE”, with the AVR-
4806 it is possible to output signals encoded in the Dolby
Headphone mode from the recording output terminal and
record them on a separate recorder.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-4806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-4806 in the language / languages: English as an attachment in your email.

The manual is 11,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon AVR-4806

Denon AVR-4806 User Manual - English - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info