2Parameters
MODE:
•DH1:
Reference room (small room with weak reverberations).
•DH2:
Live room (room with a bit stronger reverberations than
DH1).
•DH3:
Large room (larger room than DH1, offers a sense of
distance and sound diffusion effects).
•BYPASS:
Stereo sound.
DECODER:
Select this when playing analog, PCM or other 2-channel
sources.
The signals are converted into multichannel signals using
the decoders shown below and played in the Dolby
Headphone mode.
•PLII C:
Dolby Pro Logic II Cinema mode.
•PLII M
Dolby Pro Logic II Music mode.
•NEO:6 C:
DTS NEO:6 Cinema mode.
•NEO:6 M:
DTS NEO:6 Music mode.
•OFF:
The signals are played in the Dolby Headphone mode as
such (2 channels).
– Recording –
When RECOUT mode is set to “SOURCE”, with this
amplifier signals encoded in the Dolby Headphone mode
can be output from the recording output terminals and
recorded on another recorder ( page 85).
The Dolby Headphone
•The Dolby Headphone mode is set when headphones are
connected to the PHONES jack while in the DOLBY/DTS
SURROUND mode.
1Press the SURROUND PARAMETER button.
•Display the “Surround Parameter” menu.
2Press the CURSOR DDor HHbutton to select the
parameter.
3Press the CURSOR FFor GGbutton to select the
setting.
4Press the ENTER or SURROUND PARAMETER
button to complete the setting.
