32
2Press the ENTER button to switch to the Setup Lock screen.
3Select “ON”, to lock the system setup settings.
4Press the ENTER button to finalize the setting and exit the system setup mode.
When the setup lock function is activated, the settings listed below cannot be changed, and “Setup Locked” is
displayed when related buttons are operated.
•System setup settings
•Surround parameter settings
•Tone control settings
•Channel level settings (including test tones)
To unlock, press the System Setup button again and display the Setup Lock screen, then select “OFF” and press
the ENTER button.
System setup is complete. Once these settings are made, there is no need to change them unless different AV components are
connected or the speakers are repositioned.
After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1At the System Setup Menu, press the SYSTEM SETUP button.
The changed settings are entered and the on-screen display turns off.
•On-screen display signals
1
2
3
4
Signals input to the AVR-4802R On-screen display signal output
VIDEO signal input jack (yellow) S-video signal input jack VIDEO MONITOR OUT-1 video
signal output jack (yellow)
S-video MONITOR OUT-1 video
signal output jack
E
C
C
E
E
E
C
C
C
C
E
E
C
E
C
C
(C: Signal E: No signal)
NOTES:
•The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.
•The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.
•For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is
not connected to the S-video MONITOR OUT-1 video signal output jack.
(C: On-screen signals output E: On-screen signals not output)
